FAQ  •  Register   •  Gallery •  Login

It is currently Fri Apr 18, 2014 10:40 am

Wardsweb - Feed the passion, live the dream

<<

Wardsweb

User avatar

M-400t CUBE

Posts: 164

Joined: Tue Nov 10, 2009 4:30 pm

Location: San Antonio, TX

Post Sun Nov 22, 2009 9:27 am

Re: Wardsweb - Feed the passion, live the dream

treitz3 wrote:10-4. I take it that you have some sort of room absorption then?


Not yet. I need the speakers playing to dial them and the room in.
~There are many roads to audio nirvana. While the ultimate goal may be the destination, don't forget to enjoy the ride.~
<<

Wardsweb

User avatar

M-400t CUBE

Posts: 164

Joined: Tue Nov 10, 2009 4:30 pm

Location: San Antonio, TX

Post Sat Nov 28, 2009 7:48 pm

Re: Wardsweb - Feed the passion, live the dream

FINALLY they are back playing in my living room. I was going to leave the grills off but you will notice the left dust cap is dented. That is compliments of our 6 year old grandson and his marshmellow gun. You can't leave kids alone for two minutes. :(

Image

My wife said she wants the full grills cut down so the big horn is showing. Sounds like a neat look. What do you guys think about a 3/4 grill?

Image

These have not been polished yet. I need to let them cure for a few weeks before I do that.
~There are many roads to audio nirvana. While the ultimate goal may be the destination, don't forget to enjoy the ride.~
<<

stevewithrow

User avatar

SILVER-7t

Posts: 1327

Joined: Mon Aug 25, 2008 12:59 am

Location: Great NorthWest.....Carver Country..

Post Sat Nov 28, 2009 8:04 pm

Re: Wardsweb - Feed the passion, live the dream

Absolutely beautiful...!!!! That system must have such a warm sound.... *5*

I think she is right ..the 3/4 grill will have a nice look...
Last edited by stevewithrow on Sun Nov 29, 2009 2:55 am, edited 1 time in total.
<<

beemers417

User avatar

!! CarverFest Evictee !!

Posts: 1421

Joined: Tue Dec 30, 2008 3:05 pm

Location: Pittsburgh, PA

Post Sat Nov 28, 2009 8:26 pm

Re: Wardsweb - Feed the passion, live the dream

Very nice. I would love to hear it some day. Why don't you bring it to Carverfest next year.
Gunter the wonder dog is watching you...
<<

engtaz

User avatar

"TAZ"

Posts: 5163

Joined: Sat Jun 30, 2007 1:43 pm

Location: Tampa, FL

Post Sun Nov 29, 2009 3:06 am

Re: Wardsweb - Feed the passion, live the dream

She is correct. Horns need to be seen.
engtaz


Carver M4.0T in front channels to Caver AL VI's in SACD & 2 Channel setup
C 16, PT 2400, Slim Device, Carver TX-8, 490T and Rega TT w Grado Gold cart in the 2 channel setup
Bogen SRB20 is computer amp
Carver PM-350 donated for youth church use
<<

TNRabbit

User avatar

(pair of) SILVER-7 TUBE AMPs

Posts: 13258

Joined: Sun Jan 14, 2007 11:53 am

Location: TN Native Languishing in VA

Post Sun Nov 29, 2009 3:43 am

Re: Wardsweb - Feed the passion, live the dream

Ward, you can pop the cone dent back out with the vacuum. Just place the open end on the dent & turn it on for a couple of seconds & it will pull it right out, no drama!
TNRabbit
Image

From FrankieD's lips to your ears: Sunfire - a quiet box of endless power.

Sunfire TG-IV/400~7 Amp
Carver SD/A-360 CDP
Benchmark DAC-1
Sony SACD/DVD-A
Active bi-amp: Ashly XR-1001 & 2 Rane PEQ-15s
Main: HotRodded AL-IIIs
Sub: Klipsch RT-12d
Center: Sunfire CRS-3c
Surround: Sunfire CRS-3 (x 2)

OconeeOrange wrote:"Gary likes to play it 'loud' as do I. His system begs you turn it up until you die"

RIP WIlliam B. Dibble, 1948-2012. I'll miss you my friend.
<<

weitrhino

SILVER-7t

Posts: 1127

Joined: Thu Aug 17, 2006 10:40 am

Location: North Carolina

Post Sun Nov 29, 2009 10:41 am

Re: Wardsweb - Feed the passion, live the dream

TNRabbit wrote:Ward, you can pop the cone dent back out with the vacuum. Just place the open end on the dent & turn it on for a couple of seconds & it will pull it right out, no drama!

Wardsweb wrote:FINALLY they are back playing in my living room. I was going to leave the grills off but you will notice the left dust cap is dented. That is compliments of our 6 year old grandson and his marshmellow gun. You can't leave kids alone for two minutes. :(


You can also pull out the dent with some scotch tape. If you feel it is too sticky and might not release from the dust cap simply stick it to your shirt first then apply it to the cap. The dent will pull right out.
<<

Wardsweb

User avatar

M-400t CUBE

Posts: 164

Joined: Tue Nov 10, 2009 4:30 pm

Location: San Antonio, TX

Post Sun Nov 29, 2009 4:59 pm

Re: Wardsweb - Feed the passion, live the dream

Here they are with grills.

Image
~There are many roads to audio nirvana. While the ultimate goal may be the destination, don't forget to enjoy the ride.~
<<

engtaz

User avatar

"TAZ"

Posts: 5163

Joined: Sat Jun 30, 2007 1:43 pm

Location: Tampa, FL

Post Sun Nov 29, 2009 5:53 pm

Re: Wardsweb - Feed the passion, live the dream

Sweet
engtaz


Carver M4.0T in front channels to Caver AL VI's in SACD & 2 Channel setup
C 16, PT 2400, Slim Device, Carver TX-8, 490T and Rega TT w Grado Gold cart in the 2 channel setup
Bogen SRB20 is computer amp
Carver PM-350 donated for youth church use
<<

kingman

User avatar

(pair of) SILVER-7 TUBE AMPs

Posts: 5528

Joined: Sun Nov 30, 2008 2:10 pm

Location: Upstate South Carolina

Post Sun Nov 29, 2009 8:32 pm

Re: Wardsweb - Feed the passion, live the dream

3/4 grills!!!!! 8) 8) 8)
In reality, it only matters what it sounds like to YOU!!!
<<

treitz3

User avatar

"Julian"
"Julian"

Posts: 7746

Joined: Mon Oct 16, 2006 5:39 pm

Location: The tube lair in Charlotte, NC

Post Sun Nov 29, 2009 9:48 pm

Re: Wardsweb - Feed the passion, live the dream

Did you finish the veneer with a sprayed lacquer? Those look incredible!

=D> =D> =D> =D>
In search of accurate reproduction of music. Real sound is my reference and while perfection may not be attainable? If I chase it, I might just catch excellence.

The best way to enjoy digital music reproduction is to never listen to a good analogue reproduction.

Robert R. - "Did you see my North Korea analogy? I should have named it Carversite.kim"
<<

Wardsweb

User avatar

M-400t CUBE

Posts: 164

Joined: Tue Nov 10, 2009 4:30 pm

Location: San Antonio, TX

Post Sun Nov 29, 2009 10:09 pm

Re: Wardsweb - Feed the passion, live the dream

treitz3 wrote:Did you finish the veneer with a sprayed lacquer? Those look incredible!

=D> =D> =D> =D>

I started with 5 or 6 layers of brushed on so it would be thick. I then sanded a few coats off to get to glass smooth. I then sprayed 2 or 3 coats. I will wait for the lacquer to fully cure before I polish and buff.
~There are many roads to audio nirvana. While the ultimate goal may be the destination, don't forget to enjoy the ride.~
<<

treitz3

User avatar

"Julian"
"Julian"

Posts: 7746

Joined: Mon Oct 16, 2006 5:39 pm

Location: The tube lair in Charlotte, NC

Post Sun Nov 29, 2009 11:28 pm

Re: Wardsweb - Feed the passion, live the dream

You, my friend, are a man of impeccable detail. Sweet. One of these days I'd like to get my ass down there. There are signs of the economy looking up and things on my own personal horizon are looking up, so that time may not be too far away. [-o<
In search of accurate reproduction of music. Real sound is my reference and while perfection may not be attainable? If I chase it, I might just catch excellence.

The best way to enjoy digital music reproduction is to never listen to a good analogue reproduction.

Robert R. - "Did you see my North Korea analogy? I should have named it Carversite.kim"
<<

Wardsweb

User avatar

M-400t CUBE

Posts: 164

Joined: Tue Nov 10, 2009 4:30 pm

Location: San Antonio, TX

Post Thu Feb 18, 2010 12:49 pm

Re: Wardsweb - Feed the passion, live the dream

The only constant is change. For now, that means the home theater. I've got some new mains coming and the new sub horn arrived yesterday. Here is a pic as it came off the truck. Danly DTS-10 subwoofer horn

Image
~There are many roads to audio nirvana. While the ultimate goal may be the destination, don't forget to enjoy the ride.~
<<

engtaz

User avatar

"TAZ"

Posts: 5163

Joined: Sat Jun 30, 2007 1:43 pm

Location: Tampa, FL

Post Fri Feb 19, 2010 9:08 am

Re: Wardsweb - Feed the passion, live the dream

That's awesome. Congrats
engtaz


Carver M4.0T in front channels to Caver AL VI's in SACD & 2 Channel setup
C 16, PT 2400, Slim Device, Carver TX-8, 490T and Rega TT w Grado Gold cart in the 2 channel setup
Bogen SRB20 is computer amp
Carver PM-350 donated for youth church use
PreviousNext

Return to List / Update Your System

Who is online

Users browsing this forum: No registered users and 2 guests

cron
Powered by phpBB © 2011 phpBB Group.