Schematic for PM125

Carver Pro Equipment Discussions and Questions
Post Reply
byacey
Newbie
Posts: 7
Joined: Tue Apr 12, 2011 12:21 pm
Location: St. Albert, Alberta, Canada

Schematic for PM125

Post by byacey » Tue Apr 12, 2011 12:30 pm

Hi, I'm looking for a schematic for a PM125. I bought a used one recently that works great, but I like to have schematics on hand for all my equipment when the need for repair arises. I haven't opened this amp yet, so I don't know if the power supply is conventional, or phase controlled like the larger PM1.5/ PM1200.

Thanks

User avatar
kingman
(pair of) SILVER-7 TUBE AMPs
Posts: 6368
Joined: Sun Nov 30, 2008 2:10 pm
Location: Upstate South Carolina

Re: Schematic for PM125

Post by kingman » Tue Apr 12, 2011 3:01 pm

Welcome byacey!!! I don't have or know where you can find one but hang around and post some. Ofter the unexpected happens...you like it!!!! =D> =D> =D>
In reality, it only matters what it sounds like to YOU!!!

User avatar
engtaz
"TAZ"
Posts: 5390
Joined: Sat Jun 30, 2007 1:43 pm
Location: Tampa, FL

Re: Schematic for PM125

Post by engtaz » Tue Apr 12, 2011 3:50 pm

Welcome
engtaz


Carver M4.0T in front channels to Caver AL VI's in SACD & 2 Channel setup
C 16, PT 2400, Slim Device, Carver TX-8, 490T and Rega TT w Grado Gold cart in the 2 channel setup
Bogen SRB20 is computer amp
Carver PM-350 donated for youth church use

byacey
Newbie
Posts: 7
Joined: Tue Apr 12, 2011 12:21 pm
Location: St. Albert, Alberta, Canada

Re: Schematic for PM125

Post by byacey » Wed Apr 13, 2011 11:30 am

Hi, Thanks for the nice welcome. I've had quite a bit of experience working on the PM2400, PM1800, PM 1200/1.5, PT1250 , but I haven't had any experience with these smaller amps. I'm thinking it's probably just a conventional single split rail design.

Post Reply

Return to “Carver Pro”