FAQ  •  Register   •  Gallery •  Login

It is currently Thu Aug 28, 2014 12:06 am

Carver M-1.5t

<<

njpolker

M-400t CUBE

Posts: 115

Joined: Thu May 01, 2008 4:41 pm

Location: New Jersey

Post Mon Dec 01, 2008 12:38 pm

Carver M-1.5t

Up for sale is my Carver M-1.5t
Its 20+ years old and needs to be re-built. I was going to send it to Carver Repair for about a $300. upgrade/update but decided to buy something else for alot more money. It works fine until you start pushing it real hard and it shuts itself down for a few seconds then works fine until its drive it real hard again.
Please understand that it should be sent in for updates/upgrades. I don't want any question about it after the sale. I'd perfer the buyer test it out prior to paying for it. If you are local to the NJ area you can come by and pick it up and pay me later. If your not local drop me a PM and maybe we can work something out.
Asking $200.

Here is a link to the only service center to send it to
http://www.carveraudiorepair.com/
Musical Fidelity A5 CDP
Polk SDA SRSII's with upgraded x-overs - Sonicaps and Mills Resistors in the High Pass Daytons in the Low Pass also upgraded Polk RDO-194 Tweeters Dynamat applied to driver and passive radiator baskets Mye Sound Spikes
Polk SDA 2a's with upgraded x-overs (Obbligato caps and Mills resistors) RDO-194's
Anthem PRE2L tube pre-amp w/Mullard and Mazda tubes DynamiCaps
Belles 350a amp
MIT S3 IC's
Audioquest Mammoth speaker cables
Signal Cable power cords
<<

maddmaxxx

User avatar

(Pair of Silver 9t's)

Posts: 2985

Joined: Wed Oct 27, 2004 6:18 pm

Location: the World We Skate Our 'Choppers' Thru

Post Wed Dec 03, 2008 11:30 pm

Re: Carver M-1.5t

-man, i like you mr njp...

-classy way of doin business !!!...how can anyone not trust you !!!

-what'd you get anyway ???
-* © Küül ®™ /mx...
-Too hip gotta book
-"Don't BAN me Bro!"...el/doro
<<

engtaz

User avatar

"TAZ"

Posts: 5194

Joined: Sat Jun 30, 2007 1:43 pm

Location: Tampa, FL

Post Thu Dec 04, 2008 5:14 am

Re: Carver M-1.5t

You can check his M.O. on Polk froum.
engtaz


Carver M4.0T in front channels to Caver AL VI's in SACD & 2 Channel setup
C 16, PT 2400, Slim Device, Carver TX-8, 490T and Rega TT w Grado Gold cart in the 2 channel setup
Bogen SRB20 is computer amp
Carver PM-350 donated for youth church use
<<

njpolker

M-400t CUBE

Posts: 115

Joined: Thu May 01, 2008 4:41 pm

Location: New Jersey

Post Thu Dec 04, 2008 6:16 am

Re: Carver M-1.5t

Thanks guys.
Its a nice amp and with alittle upgrade can be wonderful for 20 more years. I spoke to Rolland and it will be better than new.You really can't beat that, $200 for the amp $300 for update/upgrade. Maybe if no one wants to purchase it I will get around to sending it to Rolland for the upgrades and use it with my super SDA2a's.
I am looking at a couple different amps but have my eyes on a Belles 350a. I'd like the Krell 250 but really don't want to spend $3,000. When I started looking at amps I wanted to spend $1,000 on an amp and about $600.$700 on a tube pre-amp. So I found a Anthem 2L tube pre-amp in that range but need to find the right amp.
Drew Crawford
Musical Fidelity A5 CDP
Polk SDA SRSII's with upgraded x-overs - Sonicaps and Mills Resistors in the High Pass Daytons in the Low Pass also upgraded Polk RDO-194 Tweeters Dynamat applied to driver and passive radiator baskets Mye Sound Spikes
Polk SDA 2a's with upgraded x-overs (Obbligato caps and Mills resistors) RDO-194's
Anthem PRE2L tube pre-amp w/Mullard and Mazda tubes DynamiCaps
Belles 350a amp
MIT S3 IC's
Audioquest Mammoth speaker cables
Signal Cable power cords
<<

njpolker

M-400t CUBE

Posts: 115

Joined: Thu May 01, 2008 4:41 pm

Location: New Jersey

Post Thu Dec 18, 2008 4:32 pm

Re: Carver M-1.5t

Well now with $200. for the amp and $170. for the Bob/Rita rebuild someone "could have" made out real well. [-X
I say it in past tense because I am keeping it. =D>
Thanks again for the nice words :D
Drew
Musical Fidelity A5 CDP
Polk SDA SRSII's with upgraded x-overs - Sonicaps and Mills Resistors in the High Pass Daytons in the Low Pass also upgraded Polk RDO-194 Tweeters Dynamat applied to driver and passive radiator baskets Mye Sound Spikes
Polk SDA 2a's with upgraded x-overs (Obbligato caps and Mills resistors) RDO-194's
Anthem PRE2L tube pre-amp w/Mullard and Mazda tubes DynamiCaps
Belles 350a amp
MIT S3 IC's
Audioquest Mammoth speaker cables
Signal Cable power cords
<<

BillD

User avatar

(pair of) SILVER-7 TUBE AMPs

Posts: 7295

Joined: Wed Jun 06, 2007 8:29 pm

Location: The west's most mid-western town, Scottsdale, Arizona

Post Thu Dec 18, 2008 5:03 pm

Re: Carver M-1.5t

So now, YOU'RE going to make out real well! \:D/
It should sound like it isn't there!
There is a difference between hearing and listening...
Making life enjoyable through expensive electronics.
_________________
Carver: C-4000 & C-1 preamps, PSC-60 preamp/tuner, TX-11a tuner, M-400 (2), C-500, M-500, M-500t, M-500t Mk.II, A-500x, AL-III loudspeakers (2 pr.)
Sunfire:Theater Grand III processor, Ultimate Receiver, Cinema Grand Signature 400 ~ seven, True Subwoofer Mk. II, D-10 Subwoofer
<<

njpolker

M-400t CUBE

Posts: 115

Joined: Thu May 01, 2008 4:41 pm

Location: New Jersey

Post Thu Dec 18, 2008 5:49 pm

Re: Carver M-1.5t

BillD wrote:So now, YOU'RE going to make out real well! \:D/


I think so =D> [-o<

I don't think can compare to the Belles I just got but we'll see.
Drew
Musical Fidelity A5 CDP
Polk SDA SRSII's with upgraded x-overs - Sonicaps and Mills Resistors in the High Pass Daytons in the Low Pass also upgraded Polk RDO-194 Tweeters Dynamat applied to driver and passive radiator baskets Mye Sound Spikes
Polk SDA 2a's with upgraded x-overs (Obbligato caps and Mills resistors) RDO-194's
Anthem PRE2L tube pre-amp w/Mullard and Mazda tubes DynamiCaps
Belles 350a amp
MIT S3 IC's
Audioquest Mammoth speaker cables
Signal Cable power cords

Return to Buy/Sell/Trade for Newbies

Who is online

Users browsing this forum: No registered users and 1 guest

Powered by phpBB © 2011 phpBB Group.