FAQ  •  Register   •  Gallery •  Login

It is currently Fri Aug 01, 2014 11:03 am

Various Carver parts

<<

Current Limited

Newbie

Posts: 26

Joined: Mon Jan 07, 2008 11:10 pm

Location: Central PA

Post Mon Dec 01, 2008 3:13 pm

Various Carver parts

Mag field transformers, amp/receiver circuit boards, etc. Email your requests, I just sold a lot of items to a local repair shop but still have some used and nos items left.
<<

treitz3

User avatar

"Julian"
"Julian"

Posts: 7746

Joined: Mon Oct 16, 2006 5:39 pm

Location: The tube lair in Charlotte, NC

Post Tue Dec 02, 2008 1:16 pm

Re: Various Carver parts

You got a faceplate that's black for a M4.0t or any color faceplate for a M1.0t? Button for a C1? Any 4.0t filter caps?

What kinds of things do you have? There are plenty of members that I can think of right off the top of my head that are/have been looking for certain things, which is why I ask.
In search of accurate reproduction of music. Real sound is my reference and while perfection may not be attainable? If I chase it, I might just catch excellence.

The best way to enjoy digital music reproduction is to never listen to a good analogue reproduction.

Robert R. - "Did you see my North Korea analogy? I should have named it Carversite.kim"
<<

BillD

User avatar

(pair of) SILVER-7 TUBE AMPs

Posts: 7295

Joined: Wed Jun 06, 2007 8:29 pm

Location: The west's most mid-western town, Scottsdale, Arizona

Post Tue Dec 02, 2008 3:05 pm

Re: Various Carver parts

Anyone with a truly borked amp (someone who shorted a triac trying to get it to work) could probably use one of those unobtainium field coils, too.
It should sound like it isn't there!
There is a difference between hearing and listening...
Making life enjoyable through expensive electronics.
_________________
Carver: C-4000 & C-1 preamps, PSC-60 preamp/tuner, TX-11a tuner, M-400 (2), C-500, M-500, M-500t, M-500t Mk.II, A-500x, AL-III loudspeakers (2 pr.)
Sunfire:Theater Grand III processor, Ultimate Receiver, Cinema Grand Signature 400 ~ seven, True Subwoofer Mk. II, D-10 Subwoofer
<<

engtaz

User avatar

"TAZ"

Posts: 5190

Joined: Sat Jun 30, 2007 1:43 pm

Location: Tampa, FL

Post Tue Dec 02, 2008 3:13 pm

Re: Various Carver parts

Buttons, fuse holders, feet, fascia for M500, etc. yes interested
engtaz


Carver M4.0T in front channels to Caver AL VI's in SACD & 2 Channel setup
C 16, PT 2400, Slim Device, Carver TX-8, 490T and Rega TT w Grado Gold cart in the 2 channel setup
Bogen SRB20 is computer amp
Carver PM-350 donated for youth church use
<<

Current Limited

Newbie

Posts: 26

Joined: Mon Jan 07, 2008 11:10 pm

Location: Central PA

Post Tue Dec 02, 2008 8:35 pm

Re: Various Carver parts

Mag field trans: M1.5t (nos), M1.0t (used), 7t or TFM45/42 (used), M400a/t (used), PM1.5t (used), PT2400 (used). NON mag field trans : CM1090 (used), CT7 (used), CT7 (used), HR732 (used), HR772 (used), HR752 (used). All the mag field transformers are unavailable from Carver or any other source, so when they sell I will not have any more replacements. Best way to keep them alive is to keep the input voltage constant (120vac from low impedance source) and run the output at the voltage carver recomended for that model amp. Too low input or too high output voltage will increase triac phase angle and start to drive the core into saturation, when that happens the input mains current starts to get dissipated in the primary winding resistance and over heats the transformer.

I don't have any faceplates for the M4.0t or M1.0t amps anymore, I have a set of HV caps for the M4.0t (used). If you are interested I can run a HV/ESR/dilect-abs test on the caps to be sure they are 100%, but why don't you just buy new? they don't cost that much.

Only have knobs for some receivers (but NO MXR) and CT7,CT6,CT-28v preamps. Have some power amp circuit boards for the above power amps.

I have a M500 amp thats complete, has an startup issue (sometimes it don't power up the first time, always does by the second attempt) but works otherwise. If I don't get around to fixing it in the next week or two I will sell it for parts.
<<

engtaz

User avatar

"TAZ"

Posts: 5190

Joined: Sat Jun 30, 2007 1:43 pm

Location: Tampa, FL

Post Tue Dec 02, 2008 9:18 pm

Re: Various Carver parts

Let me know about the M500 and 1.5t or 4.0t items

Thanks
engtaz


Carver M4.0T in front channels to Caver AL VI's in SACD & 2 Channel setup
C 16, PT 2400, Slim Device, Carver TX-8, 490T and Rega TT w Grado Gold cart in the 2 channel setup
Bogen SRB20 is computer amp
Carver PM-350 donated for youth church use

Return to Buy/Sell/Trade for Newbies

Who is online

Users browsing this forum: No registered users and 1 guest

Powered by phpBB © 2011 phpBB Group.