FAQ  •  Register   •  Gallery •  Login

It is currently Tue Oct 21, 2014 10:16 am

remote for htr-880

<<

cutlass81

User avatar

Newbie

Posts: 44

Joined: Sun Feb 15, 2009 2:34 am

Location: central Illinois

Post Sun Feb 15, 2009 2:49 am

remote for htr-880

Hello forum. I recently picked up a HTR-880, but am remoteless. Can anyone help me locate this remote?????? I believe it is the RH-88. Any help would be greatly apprecitated. Thanx. BTW...been reading around the forum a bit, lots of info here...very helpfull.
<<

OBI56

User avatar

SILVER-7 TUBE AMP

Posts: 4964

Joined: Sat Oct 20, 2007 12:52 am

Location: You ... OFF MY PLANET!

Post Sun Feb 15, 2009 3:50 am

Re: remote for htr-880

Hello Cutlass. That remote is no longer available but this place has used ones and substitute ones in stock.

https://secure.remotes.com/remotes/serv ... ARVER_RH88
Why let facts or common sense get in the way of your opinions.
<<

cutlass81

User avatar

Newbie

Posts: 44

Joined: Sun Feb 15, 2009 2:34 am

Location: central Illinois

Post Sun Feb 15, 2009 4:28 pm

Re: remote for htr-880

Thank you very much OBI56, I placed an order for the "lightly scratched" one. I was searching around for a few hours last nite looking for the remote and any other kind of info on this piece of gear. Is it just me, or is this receiver kind of obscure? As I couldn't find much on the User Manual either. Found this forum tho, and happy for that. Thanx again.
<<

OBI56

User avatar

SILVER-7 TUBE AMP

Posts: 4964

Joined: Sat Oct 20, 2007 12:52 am

Location: You ... OFF MY PLANET!

Post Sun Feb 15, 2009 6:30 pm

Re: remote for htr-880

Here is all the information I have on it Cutlass.

Gold Plated RCA Jack Connections, Remote Control, Exclusive Power Steering circuitry provides over 50% more power on demand for selected amplifier channels, Phono Input Stage, Two AC outlets one switched and one unswitched, Removable handles for 17" cabinet space (with trim caps), Motor-driven Volume control can be operated from the remote control, Designed by Carver Corporation in Lynnwood, WA USA, Frequency Repsonse 20-20kHz +/- 0.5dB, S/N MM Phono A-Weighted > 75dB, Input Sensitivity for 0.5V 34mV, Input Impedance 47 kohms, Maximum Input Level 5.5V, Output Impedance 1 kohm, Maximum Output Level 7V Input, Sensitivity for 0.5V phono 3.5mV
Why let facts or common sense get in the way of your opinions.
<<

cutlass81

User avatar

Newbie

Posts: 44

Joined: Sun Feb 15, 2009 2:34 am

Location: central Illinois

Post Mon Feb 16, 2009 2:21 pm

Re: remote for htr-880

Yup, OBI.... that's about what I found on info too. Got it hooked to the small Polk M30's right now and it sounds pretty good at all volumes. Later today I'll hook it up to my RTi 10's and see how it drives them.
<<

Toy Maker

User avatar

Puppet Master

Posts: 6474

Joined: Wed Oct 08, 2003 1:26 am

Post Mon Feb 16, 2009 2:38 pm

Re: remote for htr-880

I think Rolland might have some of those as well
Whatever you do in life will be insignificant, but it's very important that you do it... because nobody else will.

‎~You think Einstein walked around thinkin' everyone was a bunch of dumb shits?~

SHUT UP AND ENJOY THE MUSIC!
╭∩╮(︶︿︶)╭∩╮
<<

gdb

User avatar

SILVER-7t

Posts: 1703

Joined: Fri Apr 04, 2008 5:43 pm

Location: Central Maryland

Post Mon Feb 16, 2009 2:43 pm

Re: remote for htr-880

<<

cutlass81

User avatar

Newbie

Posts: 44

Joined: Sun Feb 15, 2009 2:34 am

Location: central Illinois

Post Thu Feb 19, 2009 3:02 pm

Re: remote for htr-880

thanx tfm.....might have to go thru them...looks like they have one.

Return to Buy/Sell/Trade for Newbies

Who is online

Users browsing this forum: No registered users and 2 guests

Powered by phpBB © 2011 phpBB Group.