FAQ  •  Register   •  Gallery •  Login

It is currently Tue Aug 19, 2014 11:57 pm

CARVERaudio.com Interconnects

<<

Toy Maker

User avatar

Puppet Master

Posts: 6440

Joined: Wed Oct 08, 2003 1:26 am

Post Sun Jan 31, 2010 8:14 pm

CARVERaudio.com Interconnects

CARVERaudio.com / Directional Interconnect Cables

Constructed from extremely high quality components (Form & Function)

Pricing:
1.0 meter Pairs $99.00
2.0 Meter Pairs $169.00

Prices do not include shipping

Features:

Directional Cables: These Cables are Grounded At The Source, to insure induced noise, does not travel with the music signal
Core Wire:
Ultra-Flex 20AWG x2 OFC with 95% OFC braid filaments to insure least signal attenuation
Triple Insulation:
OFC braiding, cotton core wrapped CPVC to isolate any crosstalk and interference
RCA Connector:
Locking, Rhodium plated machined solid brass bodies, center pin, and collar
Termination:
High Quality Lead-free Solder. Tin alloy with 4% Silver, 0.5% Copper
Exterior:
Military-Grade Super-Flex Ultra-Soft "cloth-like" braiding (nothing like the rigid plastic Nylon braid you usually see on cables)

Details:

Why use directional Interconnects??
In cables where the shield does not carry the signal or ground, the shield is normally only connected to ground at one end. In systems where there are significant differences between ground levels on various components, it may make a difference which way such cables are connected. Typically, the end where the shield is grounded should be at the source of the signal. Often, such cable has arrows on it pointing in the direction of the signal flow.
In Single-Ended interconnects, the signal wire and the ground wire (or shield in the case of coaxial construction) form a complete circuit, so both conductors carry signal currents. The ground wire or shield also serves the purpose of bringing the potential of the two components to the same level.

Why use Rhodium?
Rhodium (pronounced /ˈroʊdiəm/ ROH-dee-əm) is a rare, hard transition metal and a member of the platinum group, that does not normally form an oxide, even when heated. Oxygen is absorbed from the atmosphere at the melting point of rhodium, but on solidification, the oxygen is released. Rhodium has both a higher melting point and lower density than platinum. It is not attacked by acids.


Loop Resistance (Ohm/m) 0.005
Parallel Capacitance (pF/m) 49.1
Loop Inductance (per/m) 0.15
Dissipation Factor (@10Khz) 0.0008
Overall Size (mm) 9.3mm Φ


Image

Image

Image
Whatever you do in life will be insignificant, but it's very important that you do it 'cause nobody else will

‎~You think Einstein walked around thinkin' everyone was a bunch of dumb shits?~

SHUT UP AND ENJOY THE MUSIC!
╭∩╮(︶︿︶)╭∩╮
<<

TNRabbit

User avatar

(pair of) SILVER-7 TUBE AMPs

Posts: 13292

Joined: Sun Jan 14, 2007 11:53 am

Location: TN Native Languishing in VA

Post Mon Feb 01, 2010 8:05 am

Re: CARVERaudio.com Interconnects

Perty. I'll take 4 (2 pair) at 18 inches each. Thx~
TNRabbit
Image

From FrankieD's lips to your ears: Sunfire - a quiet box of endless power.

Sunfire TG-IV/400~7 Amp
Carver SD/A-360 CDP
Benchmark DAC-1
Sony SACD/DVD-A
Active bi-amp: Ashly XR-1001 & 2 Rane PEQ-15s
Main: HotRodded AL-IIIs
Sub: Klipsch RT-12d
Center: Sunfire CRS-3c
Surround: Sunfire CRS-3 (x 2)

OconeeOrange wrote:"Gary likes to play it 'loud' as do I. His system begs you turn it up until you die"

RIP WIlliam B. Dibble, 1948-2012. I'll miss you my friend.
<<

Toy Maker

User avatar

Puppet Master

Posts: 6440

Joined: Wed Oct 08, 2003 1:26 am

Post Mon Feb 01, 2010 12:38 pm

Re: CARVERaudio.com Interconnects

I don't plan to make the 1/2 meter pairs... (too short)
I do still have 3-4 sets, ( non-directional) but after them, I think I am going to stick with the 1-meter lengths and above.

Gary. If you'd like the short, "non-directional" ones I have... I'll give them to you for $65 per pair.
If not, you'll have to go with the 1-meter "directional" cables...
I have both in stock, and can ship them tomorrow.
Whatever you do in life will be insignificant, but it's very important that you do it 'cause nobody else will

‎~You think Einstein walked around thinkin' everyone was a bunch of dumb shits?~

SHUT UP AND ENJOY THE MUSIC!
╭∩╮(︶︿︶)╭∩╮
<<

TNRabbit

User avatar

(pair of) SILVER-7 TUBE AMPs

Posts: 13292

Joined: Sun Jan 14, 2007 11:53 am

Location: TN Native Languishing in VA

Post Mon Feb 01, 2010 1:01 pm

Re: CARVERaudio.com Interconnects

What's the differences between the short non-direction & directions models?
TNRabbit
Image

From FrankieD's lips to your ears: Sunfire - a quiet box of endless power.

Sunfire TG-IV/400~7 Amp
Carver SD/A-360 CDP
Benchmark DAC-1
Sony SACD/DVD-A
Active bi-amp: Ashly XR-1001 & 2 Rane PEQ-15s
Main: HotRodded AL-IIIs
Sub: Klipsch RT-12d
Center: Sunfire CRS-3c
Surround: Sunfire CRS-3 (x 2)

OconeeOrange wrote:"Gary likes to play it 'loud' as do I. His system begs you turn it up until you die"

RIP WIlliam B. Dibble, 1948-2012. I'll miss you my friend.
<<

BillD

User avatar

(pair of) SILVER-7 TUBE AMPs

Posts: 7295

Joined: Wed Jun 06, 2007 8:29 pm

Location: The west's most mid-western town, Scottsdale, Arizona

Post Mon Feb 01, 2010 1:29 pm

Re: CARVERaudio.com Interconnects

TNRabbit wrote:What's the differences between the short non-direction & directions models?
Gary, I think this means, IIRC, that the ground (shield) is connected at both ends. In the directional ones, you connect it only at the source end, so your components keep their own grounds and don't "share" the noise from another components ground. It is what most ground "lift" switches do inside the box which allows the box to float its ground separately from other components. It's typically no big deal, as most cables are grounded at both ends. So, if you aren't having trouble now, you won't with directionless cables.
It should sound like it isn't there!
There is a difference between hearing and listening...
Making life enjoyable through expensive electronics.
_________________
Carver: C-4000 & C-1 preamps, PSC-60 preamp/tuner, TX-11a tuner, M-400 (2), C-500, M-500, M-500t, M-500t Mk.II, A-500x, AL-III loudspeakers (2 pr.)
Sunfire:Theater Grand III processor, Ultimate Receiver, Cinema Grand Signature 400 ~ seven, True Subwoofer Mk. II, D-10 Subwoofer
<<

Toy Maker

User avatar

Puppet Master

Posts: 6440

Joined: Wed Oct 08, 2003 1:26 am

Post Mon Feb 01, 2010 2:19 pm

Re: CARVERaudio.com Interconnects

Thank you Bill... well put !
Whatever you do in life will be insignificant, but it's very important that you do it 'cause nobody else will

‎~You think Einstein walked around thinkin' everyone was a bunch of dumb shits?~

SHUT UP AND ENJOY THE MUSIC!
╭∩╮(︶︿︶)╭∩╮
<<

OconeeOrange

SILVER-7 TUBE AMP

Posts: 4482

Joined: Sat Mar 28, 2009 6:24 pm

Post Mon Feb 01, 2010 2:33 pm

Re: CARVERaudio.com Interconnects

Damn, just bought some WireWorld before I saw this.
This will sound kinda silly, but what about 1/4 inch (headphone type plug) to two RCA? I need at least five.
<<

BrianT

User avatar

Pair of Silver Sevens

Posts: 1374

Joined: Sat Oct 11, 2008 4:51 pm

Location: Ottawa, Canada

Post Mon Feb 01, 2010 4:57 pm

Re: CARVERaudio.com Interconnects

Toy Maker wrote:CARVERaudio.com / Directional Interconnect Cables

Constructed from extremely high quality components (Form & Function)

Pricing:

1.0 meter Pairs $96.00
1.5 meter Pairs $123.00



James,

You can put me down for:

2 x 1.0 meter pairs
1 x 1.5 meter pair

No RUSH, as I have to finish the KT88z upgrade 1st.

Brian
VPI Classic Turntable (blk)
Transfiguration Phoenix Cartridge
Sunfire Vacuum Tube Control Centre. C/W Mod'ed Phono Stage
Carver Silver 7's Tube Amps
Raysonic CD-168 CDP (silver)
Carver TX11.
B&W 802D's Rosenut
<<

Toy Maker

User avatar

Puppet Master

Posts: 6440

Joined: Wed Oct 08, 2003 1:26 am

Post Mon Feb 01, 2010 5:03 pm

Re: CARVERaudio.com Interconnects

I got ya'

I have the tubes IN HAND, and going to box them now.
I will send the (2) 1-meter pairs with the tubes...
The 1.5 meter I have to make.

I'll put them on your tab =D>
Whatever you do in life will be insignificant, but it's very important that you do it 'cause nobody else will

‎~You think Einstein walked around thinkin' everyone was a bunch of dumb shits?~

SHUT UP AND ENJOY THE MUSIC!
╭∩╮(︶︿︶)╭∩╮
<<

BrianT

User avatar

Pair of Silver Sevens

Posts: 1374

Joined: Sat Oct 11, 2008 4:51 pm

Location: Ottawa, Canada

Post Mon Feb 01, 2010 5:35 pm

Re: CARVERaudio.com Interconnects

Toy Maker wrote:
I'll put them on your tab =D>



That's very nice of you James, :)
VPI Classic Turntable (blk)
Transfiguration Phoenix Cartridge
Sunfire Vacuum Tube Control Centre. C/W Mod'ed Phono Stage
Carver Silver 7's Tube Amps
Raysonic CD-168 CDP (silver)
Carver TX11.
B&W 802D's Rosenut
<<

nooshinjohn

SILVER-7t

Posts: 1703

Joined: Fri Jan 30, 2009 8:54 pm

Post Mon Feb 01, 2010 6:00 pm

Re: CARVERaudio.com Interconnects

I would love to try these... can you put a pair of 2 meter and a set of one meter on my tab as well? [-o< :lol:

John
Carver Statement Reference Monoblocks!!!Sunfire Signature TGA 7401, Pioneer SC-37 Surround Receiver, Sunfire Classic Vacuum Tube Preamp with Phono Stage, Magnepan MG-20's(main) Polk Audio RM 7500's(surround) Polk Audio CSi-a6 (center) Yamaha PX-3 Turntable, Pioneer Elite PD-DJ9 SACD/CD Player, Sony BDPs-350 BLUray player, LG 42lg50 1080p HDTV, Klipsch Synergy SUB-10 powered subwoofer.[/size]
<<

Jag_97470

SILVER-7 TUBE AMP

Posts: 3383

Joined: Fri Sep 19, 2008 12:06 am

Location: Oregon

Post Mon Feb 01, 2010 8:24 pm

Re: CARVERaudio.com Interconnects

Hey yeah, good question? I don't have a tab now, but if I started a TAB or you created a tab, how much could I put on my TAB? :lol: :lol: :-k
<<

OconeeOrange

SILVER-7 TUBE AMP

Posts: 4482

Joined: Sat Mar 28, 2009 6:24 pm

Post Mon Feb 01, 2010 8:32 pm

Re: CARVERaudio.com Interconnects

damn good question as you might have posted that to rip us off.

Still, if you will bring those cables I need to Carverfest, I will throw in a bottle of good Scotch as a bonus.

Bill
<<

Toy Maker

User avatar

Puppet Master

Posts: 6440

Joined: Wed Oct 08, 2003 1:26 am

Post Mon Feb 01, 2010 9:31 pm

Re: CARVERaudio.com Interconnects

=; [-X I don't drink... just bring me cash
Whatever you do in life will be insignificant, but it's very important that you do it 'cause nobody else will

‎~You think Einstein walked around thinkin' everyone was a bunch of dumb shits?~

SHUT UP AND ENJOY THE MUSIC!
╭∩╮(︶︿︶)╭∩╮
<<

Toy Maker

User avatar

Puppet Master

Posts: 6440

Joined: Wed Oct 08, 2003 1:26 am

Post Mon Feb 01, 2010 9:33 pm

Re: CARVERaudio.com Interconnects

nooshinjohn wrote:I would love to try these... can you put a pair of 2 meter and a set of one meter on my tab as well? [-o< :lol:

John



YOUR bill is racking up FAST.... You better start sending $$$ now :lol:
Still need to know what you are going to do ?? You keep changing your mind :lol:
Whatever you do in life will be insignificant, but it's very important that you do it 'cause nobody else will

‎~You think Einstein walked around thinkin' everyone was a bunch of dumb shits?~

SHUT UP AND ENJOY THE MUSIC!
╭∩╮(︶︿︶)╭∩╮
Next

Return to CARVERaudio.com Products

Who is online

Users browsing this forum: No registered users and 2 guests

Powered by phpBB © 2011 phpBB Group.