Page 1 of 4

CarverFest Streeming Video

Posted: Fri Jun 27, 2008 2:01 pm
by Toy Maker
As long as we get a decent WiFi connection this year it WILL HAPPEN !!!
Getting a new CarverFest Toy. Mobile Streaming Video !!! No PC needed

Try it out... tell me if it's working ok ?!?!?!?!

http://98.208.192.225:2000

OK. I JUST CHANGED IT !!!!!!!!!!!!!!!!!!!!!!
I only set up 1-7 for now...
You will probably have to install an add-on for IE... to view anything.
My suggestion, reboot your computer, use the names and PW's below, and start from scratch.
If anything pops up to add, or install DO IT.
Most of us can use it, there are a few that can't, and I can't do much to help from here....


USER--------Password

1---------------1
2---------------2
3---------------3
4---------------4
5---------------5
6---------------6
7---------------7

Click: "View Video" tab at the top


Plug-n-Plop !!!! Plug it in, plop it down.

Re: CarverFest Streeming Video

Posted: Fri Jun 27, 2008 2:39 pm
by F1nut
UGH!!!

Re: CarverFest Streeming Video

Posted: Fri Jun 27, 2008 3:26 pm
by BillD
Be sure to post the IP address, but in some private place so visitors can't see it.

Re: CarverFest Streeming Video

Posted: Fri Jun 27, 2008 4:51 pm
by treitz3
That gadget have audio as well? :-k

Re: CarverFest Streeming Video

Posted: Fri Jun 27, 2008 5:02 pm
by kloneman1
Toy Maker wrote:As long as we get a decent WiFi connection this year it WILL HAPPEN !!!
Getting a new CarverFest Toy. Mobile Streaming Video !!! No PC needed

Plug-n-Plop !!!! Plug it in, plop it down.
hehe your post number was 1776!!!! What a coincidence.

Re: CarverFest Streeming Video

Posted: Fri Jun 27, 2008 6:52 pm
by Toy Maker
Like you really needed to ask... :roll:

http://www.linksys.com/servlet/Satellit ... 2686883B01

If you want the video to be visible from a remote location or from the Internet, you can open an appropriate port on the Router, and then create password protected accounts to manage access to the camera, or leave it wide open for the world to see. Support for Dynamic DNS lets you access your camera using an easy-to-remember "name", even while using a dynamic IP address. The Pan/Tilt and digital zoom function allows you to remotely control the camera movement and focus, giving you maximum flexibility remotely. Up to 10 simultaneous users can have access to the camera at any point in time. Software is included for multiple camera monitoring and recording to your hard drive with advanced search by time and date. Recording can be set up to record by motion trigger, manual or schedule recording and playback on Windows Media Player without the need for a proprietary player.

Re: CarverFest Streeming Video

Posted: Thu Jul 03, 2008 6:08 pm
by Toy Maker
Try it out... tell me if it's working ok ?!?!?!?!

Re: CarverFest Streeming Video

Posted: Thu Jul 03, 2008 6:28 pm
by BillD
Well, I tried - didn't see anything! I tried to set up a user name and password for myself. Do you see it?

Re: CarverFest Streeming Video

Posted: Thu Jul 03, 2008 7:24 pm
by radioeng2
I see a picture!! Had to click on the tab at the top to "View Video" and I had to install a Cisco Active-X. But comes right up then! Looks a bit dark but with brightness I'm assuming that would be much nicer! Also can hear sound since I can hear the pan motor...and I can control the look angle. Pretty cool....

I think this can be a really cool addition to the CF this year for those that can't get there!!

Mark

Re: CarverFest Streeming Video

Posted: Thu Jul 03, 2008 8:01 pm
by BillD
Another thing that doesn't work on Firefox. Works fine with IE.

Re: CarverFest Streeming Video

Posted: Thu Jul 03, 2008 8:38 pm
by OBI56
Someone's sofa and laptop.

Re: CarverFest Streeming Video

Posted: Thu Jul 03, 2008 8:46 pm
by BillD
And a dog (pug?)

Re: CarverFest Streeming Video

Posted: Fri Jul 04, 2008 11:03 am
by t-mitch4
Loud and Clear Here!

Tom

Re: CarverFest Streeming Video

Posted: Fri Jul 04, 2008 1:06 pm
by Kahuna
Great Idea!

Re: CarverFest Streeming Video

Posted: Fri Jul 04, 2008 6:42 pm
by TNRabbit
It's dark as shit; all I can see is the window & part of the couch.... :-s