Hum from 6250 Receiver

If you have Carver repair questions, or can help other users with repairs, this is the place for it
Post Reply
Jackson636
Newbie
Posts: 3
Joined: Wed Nov 05, 2003 7:30 am

Hum from 6250 Receiver

Post by Jackson636 » Mon Jan 05, 2004 11:49 am

Slight hum from my receiver. It happens in all modes and does not increase with the
volume control. I'm new to this receiver as I got it off of Ebay about three
weeks ago and never noticed the hum before yesterday. Any Help?

M. Brannon
Newbie
Posts: 3
Joined: Sat Jan 10, 2004 10:58 pm

Post by M. Brannon » Sun Jan 11, 2004 4:39 pm

It would be a good idea to check the grounding of all your equipment, and it's proximity to other elctrical sources ie: Televisions. Also make sure your power chord does not cross over or intertwine with your speaker wires at any point...These are basic tips I picked up along the years, hope they help

Post Reply

Return to “CARVER Equipment Repair/Help Forum”