M-1.5t Replacement Parts List

If you have Carver repair questions, or can help other users with repairs, this is the place for it
Post Reply
User avatar
stereo_buff
TFM-55
Posts: 753
Joined: Mon Dec 03, 2007 7:01 pm
Location: Rained out in W. Washington

M-1.5t Replacement Parts List

Post by stereo_buff » Fri Feb 12, 2010 8:47 am

I have seen somewhere (perhaps on that 'other' website) a replacement parts listing, particularly capacitors, including one of the following (Mouser/Digi-Key/Part Express) sources part numbers, for the M-500t (perhaps it was BillD?). Has anyone done this research and compiled a similar list for the M-1.5t? Mine is still working (last time I checked), but since it has now been superseded by a Sunfire amplifier in my setup, it has been sitting awhile - not good for 20 something capacitors! At any rate, I would like to replace the caps now while there are no usage demands on the unit. Any help appreciated!

User avatar
BillD
R.I.P. Friend
R.I.P. Friend
Posts: 7126
Joined: Wed Jun 06, 2007 8:29 pm
Location: The west's most mid-western town, Scottsdale, Arizona

Re: M-1.5t Replacement Parts List

Post by BillD » Fri Feb 12, 2010 10:36 am

Never had an M-1.5t, so I've never looked. I think that's the one that had a dual voltage cap that had to have a part made. Anyone?
It should sound like it isn't there!
There is a difference between hearing and listening...
Making life enjoyable through expensive electronics.
_________________
Carver: C-4000 & C-1 preamps, PSC-60 preamp/tuner, TX-11a tuner, M-400 (2), C-500, M-500, M-500t, M-500t Mk.II, A-500x, AL-III loudspeakers (2 pr.)
Sunfire:Theater Grand III processor, Ultimate Receiver, Cinema Grand Signature 400 ~ seven, True Subwoofer Mk. II, D-10 Subwoofer

Post Reply

Return to “CARVER Equipment Repair/Help Forum”