M1.5 ticking noise

If you have Carver repair questions, or can help other users with repairs, this is the place for it
Post Reply
lanf08
Newbie
Posts: 5
Joined: Wed Nov 04, 2009 1:07 pm

M1.5 ticking noise

Post by lanf08 » Thu Mar 04, 2010 9:28 am

Hi have a M1.5 that is making ticking noise. The noise is coming from the power supply and is doing a tick, tick non stop at a relatively fast speed. Can anyone help me on that....

User avatar
BillD
R.I.P. Friend
R.I.P. Friend
Posts: 7126
Joined: Wed Jun 06, 2007 8:29 pm
Location: The west's most mid-western town, Scottsdale, Arizona

Re: M1.5 ticking noise

Post by BillD » Thu Mar 04, 2010 10:44 am

Get in there and check the supply (rail) voltage. It sounds like it's too high. There is a pot in there to do this. I got an M-500 to work on that made that sound, and when I turned it down, it stopped.
It should sound like it isn't there!
There is a difference between hearing and listening...
Making life enjoyable through expensive electronics.
_________________
Carver: C-4000 & C-1 preamps, PSC-60 preamp/tuner, TX-11a tuner, M-400 (2), C-500, M-500, M-500t, M-500t Mk.II, A-500x, AL-III loudspeakers (2 pr.)
Sunfire:Theater Grand III processor, Ultimate Receiver, Cinema Grand Signature 400 ~ seven, True Subwoofer Mk. II, D-10 Subwoofer

Post Reply

Return to “CARVER Equipment Repair/Help Forum”