TFM 35 Voltage at TPs

If you have Carver repair questions, or can help other users with repairs, this is the place for it
Post Reply
tgunnd39
Newbie
Posts: 4
Joined: Sat Aug 21, 2010 2:49 pm

TFM 35 Voltage at TPs

Post by tgunnd39 » Fri Sep 03, 2010 5:43 pm

Just a quick question:

What should be the voltage at test points 201/203 & 202/204 on a TFM 35?
Any help is greatly appreciated!
Thanks O:)

User avatar
BillD
R.I.P. Friend
R.I.P. Friend
Posts: 7126
Joined: Wed Jun 06, 2007 8:29 pm
Location: The west's most mid-western town, Scottsdale, Arizona

Re: TFM 35 Voltage at TPs

Post by BillD » Fri Sep 03, 2010 7:10 pm

I believe they are like the M-1.0t at 0.5mV
It should sound like it isn't there!
There is a difference between hearing and listening...
Making life enjoyable through expensive electronics.
_________________
Carver: C-4000 & C-1 preamps, PSC-60 preamp/tuner, TX-11a tuner, M-400 (2), C-500, M-500, M-500t, M-500t Mk.II, A-500x, AL-III loudspeakers (2 pr.)
Sunfire:Theater Grand III processor, Ultimate Receiver, Cinema Grand Signature 400 ~ seven, True Subwoofer Mk. II, D-10 Subwoofer

tgunnd39
Newbie
Posts: 4
Joined: Sat Aug 21, 2010 2:49 pm

Re: TFM 35 Voltage at TPs

Post by tgunnd39 » Fri Sep 03, 2010 9:05 pm

Thank you Bill :)

201 was at 6.5mv and 202 was at 4.9 after settling, so thanks again.

User avatar
BillD
R.I.P. Friend
R.I.P. Friend
Posts: 7126
Joined: Wed Jun 06, 2007 8:29 pm
Location: The west's most mid-western town, Scottsdale, Arizona

Re: TFM 35 Voltage at TPs

Post by BillD » Sat Sep 04, 2010 10:37 am

Well, you are supposed to set those after turning on the amp from cold and waiting 2 minutes. They will drift higher after the amp continues to warm or be used.
It should sound like it isn't there!
There is a difference between hearing and listening...
Making life enjoyable through expensive electronics.
_________________
Carver: C-4000 & C-1 preamps, PSC-60 preamp/tuner, TX-11a tuner, M-400 (2), C-500, M-500, M-500t, M-500t Mk.II, A-500x, AL-III loudspeakers (2 pr.)
Sunfire:Theater Grand III processor, Ultimate Receiver, Cinema Grand Signature 400 ~ seven, True Subwoofer Mk. II, D-10 Subwoofer

Post Reply

Return to “CARVER Equipment Repair/Help Forum”