Sun Jun 19, 2011 11:23 am
ALIII crossover component list?
Hello, does anyone have a list of components in the ALIII crossover? I want to replace caps, resistors, etc. with the correct values. Thanks.
It is currently Thu May 23, 2013 8:21 pm
ALIII crossover component list?
12 posts
• Page 1 of 1
(pair of) SILVER-7 TUBE AMPs
Posts: 7295
Joined: Wed Jun 06, 2007 9:29 pm
Location: The west's most mid-western town, Scottsdale, Arizona
Sun Jun 19, 2011 12:13 pm
Re: ALIII crossover component list?
I've been looking for a schematic for years.
It should sound like it isn't there!
There is a difference between hearing and listening...
Making life enjoyable through expensive electronics.
_________________
Carver: C-4000 & C-1 preamps, PSC-60 preamp/tuner, TX-11a tuner, M-400 (2), C-500, M-500, M-500t, M-500t Mk.II, A-500x, AL-III loudspeakers (2 pr.)
Sunfire:Theater Grand III processor, Ultimate Receiver, Cinema Grand Signature 400 ~ seven, True Subwoofer Mk. II, D-10 Subwoofer
There is a difference between hearing and listening...
Making life enjoyable through expensive electronics.
_________________
Carver: C-4000 & C-1 preamps, PSC-60 preamp/tuner, TX-11a tuner, M-400 (2), C-500, M-500, M-500t, M-500t Mk.II, A-500x, AL-III loudspeakers (2 pr.)
Sunfire:Theater Grand III processor, Ultimate Receiver, Cinema Grand Signature 400 ~ seven, True Subwoofer Mk. II, D-10 Subwoofer
Sun Jun 19, 2011 12:22 pm
Re: ALIII crossover component list?
Nobody does. We tried to get it from Bob Carver but that never materialized. I don't know if ANYONE has a schematic of the AL-III crossover.
TNRabbit
From FrankieD's lips to your ears: Sunfire: a quiet box of endless power.
Sunfire TG-IV/400~7 Amp
Carver SD/A-360 CDP
Benchmark DAC-1
Sony SACD/DVD-A
Active bi-amp: Ashly XR-1001 & 2 Rane PEQ-15s
Main: HotRodded AL-IIIs
Sub: Klipsch RT-12d
Center: Sunfire CRS-3c
Surround: Sunfire CRS-3 (x 2)
RIP WIlliam B. Dibble, 1948-2012. I'll miss you my friend.
From FrankieD's lips to your ears: Sunfire: a quiet box of endless power.
Sunfire TG-IV/400~7 Amp
Carver SD/A-360 CDP
Benchmark DAC-1
Sony SACD/DVD-A
Active bi-amp: Ashly XR-1001 & 2 Rane PEQ-15s
Main: HotRodded AL-IIIs
Sub: Klipsch RT-12d
Center: Sunfire CRS-3c
Surround: Sunfire CRS-3 (x 2)
OconeeOrange wrote:"Gary likes to play it 'loud' as do I. His system begs you turn it up until you die"
RIP WIlliam B. Dibble, 1948-2012. I'll miss you my friend.
Sun Jun 19, 2011 3:40 pm
Re: ALIII crossover component list?
I think I have one somewhere... It might be the AL-IIIplus, I'll look into it.
Whatever you do in life will be insignificant, but it's very important that you do it 'cause nobody else will
~You think Einstein walked around thinkin' everyone was a bunch of dumb shits?~
ＳＨＵＴ ＵＰ ＡＮＤ ＥＮＪＯＹ ＴＨＥ ＭＵＳＩＣ！
╭∩╮（︶︿︶）╭∩╮
~You think Einstein walked around thinkin' everyone was a bunch of dumb shits?~
ＳＨＵＴ ＵＰ ＡＮＤ ＥＮＪＯＹ ＴＨＥ ＭＵＳＩＣ！
╭∩╮（︶︿︶）╭∩╮
(pair of) SILVER-7 TUBE AMPs
Posts: 7295
Joined: Wed Jun 06, 2007 9:29 pm
Location: The west's most mid-western town, Scottsdale, Arizona
Sun Jun 19, 2011 5:07 pm
Re: ALIII crossover component list?
That would be great, James.
It should sound like it isn't there!
There is a difference between hearing and listening...
Making life enjoyable through expensive electronics.
_________________
Carver: C-4000 & C-1 preamps, PSC-60 preamp/tuner, TX-11a tuner, M-400 (2), C-500, M-500, M-500t, M-500t Mk.II, A-500x, AL-III loudspeakers (2 pr.)
Sunfire:Theater Grand III processor, Ultimate Receiver, Cinema Grand Signature 400 ~ seven, True Subwoofer Mk. II, D-10 Subwoofer
There is a difference between hearing and listening...
Making life enjoyable through expensive electronics.
_________________
Carver: C-4000 & C-1 preamps, PSC-60 preamp/tuner, TX-11a tuner, M-400 (2), C-500, M-500, M-500t, M-500t Mk.II, A-500x, AL-III loudspeakers (2 pr.)
Sunfire:Theater Grand III processor, Ultimate Receiver, Cinema Grand Signature 400 ~ seven, True Subwoofer Mk. II, D-10 Subwoofer
Sun Jun 19, 2011 10:15 pm
Re: ALIII crossover component list?
Sorry, no schematic for the AL-III. Lots of Platinum schematics though. 
IF RAY WOULD EVER SEND ME MY SET OF AL-III CROSSOVERS I HAVE BEEN WAITING ON SINCE SEP....](./images/smilies/eusa_wall.gif "Brick wall")
I might be able to help you.
IF RAY WOULD EVER SEND ME MY SET OF AL-III CROSSOVERS I HAVE BEEN WAITING ON SINCE SEP....
I might be able to help you.
Whatever you do in life will be insignificant, but it's very important that you do it 'cause nobody else will
~You think Einstein walked around thinkin' everyone was a bunch of dumb shits?~
ＳＨＵＴ ＵＰ ＡＮＤ ＥＮＪＯＹ ＴＨＥ ＭＵＳＩＣ！
╭∩╮（︶︿︶）╭∩╮
~You think Einstein walked around thinkin' everyone was a bunch of dumb shits?~
ＳＨＵＴ ＵＰ ＡＮＤ ＥＮＪＯＹ ＴＨＥ ＭＵＳＩＣ！
╭∩╮（︶︿︶）╭∩╮
(pair of) SILVER-7 TUBE AMPs
Posts: 7295
Joined: Wed Jun 06, 2007 9:29 pm
Location: The west's most mid-western town, Scottsdale, Arizona
Sun Jun 19, 2011 10:16 pm
Re: ALIII crossover component list?
Damn! Could someone ask Bob nicely, AGAIN!
It should sound like it isn't there!
There is a difference between hearing and listening...
Making life enjoyable through expensive electronics.
_________________
Carver: C-4000 & C-1 preamps, PSC-60 preamp/tuner, TX-11a tuner, M-400 (2), C-500, M-500, M-500t, M-500t Mk.II, A-500x, AL-III loudspeakers (2 pr.)
Sunfire:Theater Grand III processor, Ultimate Receiver, Cinema Grand Signature 400 ~ seven, True Subwoofer Mk. II, D-10 Subwoofer
There is a difference between hearing and listening...
Making life enjoyable through expensive electronics.
_________________
Carver: C-4000 & C-1 preamps, PSC-60 preamp/tuner, TX-11a tuner, M-400 (2), C-500, M-500, M-500t, M-500t Mk.II, A-500x, AL-III loudspeakers (2 pr.)
Sunfire:Theater Grand III processor, Ultimate Receiver, Cinema Grand Signature 400 ~ seven, True Subwoofer Mk. II, D-10 Subwoofer
Sun Jun 19, 2011 10:22 pm
Re: ALIII crossover component list?
I have the AL-III speaker and crossover "assembly drawings", but they do not have any values on them.
Whatever you do in life will be insignificant, but it's very important that you do it 'cause nobody else will
~You think Einstein walked around thinkin' everyone was a bunch of dumb shits?~
ＳＨＵＴ ＵＰ ＡＮＤ ＥＮＪＯＹ ＴＨＥ ＭＵＳＩＣ！
╭∩╮（︶︿︶）╭∩╮
~You think Einstein walked around thinkin' everyone was a bunch of dumb shits?~
ＳＨＵＴ ＵＰ ＡＮＤ ＥＮＪＯＹ ＴＨＥ ＭＵＳＩＣ！
╭∩╮（︶︿︶）╭∩╮
(pair of) SILVER-7 TUBE AMPs
Posts: 7295
Joined: Wed Jun 06, 2007 9:29 pm
Location: The west's most mid-western town, Scottsdale, Arizona
Sun Jun 19, 2011 10:26 pm
Re: ALIII crossover component list?
Do they show the wiring of the crossovers? Certainly values would be more meaningful, especially for inductors. You can usually read the markings on resistors and capacitors, but with inductors, it's a crap shoot, and I really don't want to set up a fixed resistance and a fully adjustable tone generator to calculate inductance. But, I'd take wiring diagrams, too. That way, I might be able to simulate the action.
It should sound like it isn't there!
There is a difference between hearing and listening...
Making life enjoyable through expensive electronics.
_________________
Carver: C-4000 & C-1 preamps, PSC-60 preamp/tuner, TX-11a tuner, M-400 (2), C-500, M-500, M-500t, M-500t Mk.II, A-500x, AL-III loudspeakers (2 pr.)
Sunfire:Theater Grand III processor, Ultimate Receiver, Cinema Grand Signature 400 ~ seven, True Subwoofer Mk. II, D-10 Subwoofer
There is a difference between hearing and listening...
Making life enjoyable through expensive electronics.
_________________
Carver: C-4000 & C-1 preamps, PSC-60 preamp/tuner, TX-11a tuner, M-400 (2), C-500, M-500, M-500t, M-500t Mk.II, A-500x, AL-III loudspeakers (2 pr.)
Sunfire:Theater Grand III processor, Ultimate Receiver, Cinema Grand Signature 400 ~ seven, True Subwoofer Mk. II, D-10 Subwoofer
Sun Jun 19, 2011 10:55 pm
Re: ALIII crossover component list?
Remember this is the AL-III+
Whatever you do in life will be insignificant, but it's very important that you do it 'cause nobody else will
~You think Einstein walked around thinkin' everyone was a bunch of dumb shits?~
ＳＨＵＴ ＵＰ ＡＮＤ ＥＮＪＯＹ ＴＨＥ ＭＵＳＩＣ！
╭∩╮（︶︿︶）╭∩╮
~You think Einstein walked around thinkin' everyone was a bunch of dumb shits?~
ＳＨＵＴ ＵＰ ＡＮＤ ＥＮＪＯＹ ＴＨＥ ＭＵＳＩＣ！
╭∩╮（︶︿︶）╭∩╮
Mon Jun 20, 2011 4:33 am
Re: ALIII crossover component list?
BillD wrote:Damn! Could someone ask Bob nicely, AGAIN!
Bob looked for a long time but never found any. The last thing I heard from him or his daughter was that there was someone on ebay selling Carver schematics & to try that~
TNRabbit
From FrankieD's lips to your ears: Sunfire: a quiet box of endless power.
Sunfire TG-IV/400~7 Amp
Carver SD/A-360 CDP
Benchmark DAC-1
Sony SACD/DVD-A
Active bi-amp: Ashly XR-1001 & 2 Rane PEQ-15s
Main: HotRodded AL-IIIs
Sub: Klipsch RT-12d
Center: Sunfire CRS-3c
Surround: Sunfire CRS-3 (x 2)
RIP WIlliam B. Dibble, 1948-2012. I'll miss you my friend.
From FrankieD's lips to your ears: Sunfire: a quiet box of endless power.
Sunfire TG-IV/400~7 Amp
Carver SD/A-360 CDP
Benchmark DAC-1
Sony SACD/DVD-A
Active bi-amp: Ashly XR-1001 & 2 Rane PEQ-15s
Main: HotRodded AL-IIIs
Sub: Klipsch RT-12d
Center: Sunfire CRS-3c
Surround: Sunfire CRS-3 (x 2)
OconeeOrange wrote:"Gary likes to play it 'loud' as do I. His system begs you turn it up until you die"
RIP WIlliam B. Dibble, 1948-2012. I'll miss you my friend.
12 posts
• Page 1 of 1
Return to CARVER Equipment Repair/Help Forum
Who is online
Users browsing this forum: No registered users and 1 guest