Page 1 of 1

m 1.0t dead quiet -grrrrr

Posted: Tue Mar 05, 2013 4:05 pm
by briandarflinger
Hello everyone! I'm back! OK, So I bought a dead m1.0t on flea-bay, and figured I could fix it by replacing all the caps. I've replaced all capacitors on my other m1.0t's and have had great success. But not this one. When I got it, you could just barely hear the audio out of the speakers. Now that I replaced all the caps,(big and small) the problem remains. Again,, it sounds like there is no amplification through the amp, and the audio is barely coming through.. Where should I look next? Any quick voltage checks I could do?? Any help would be appreciated!! BTW, when its turned on, the lights work, and the bias voltages are all close. Thanks in advance.
Brian

Re: m 1.0t dead quiet -grrrrr

Posted: Tue Mar 05, 2013 5:17 pm
by EndersShadow
Call Tom and Vintage Hi-Fi in Pittsburg and ask. He just re-did my M1.0t and its working good.

Re: m 1.0t dead quiet -grrrrr

Posted: Tue Mar 05, 2013 5:42 pm
by briandarflinger
Thanks, but I like the satisfaction of fixing things myself.

Re: m 1.0t dead quiet -grrrrr

Posted: Tue Mar 05, 2013 6:05 pm
by EndersShadow
briandarflinger wrote:Thanks, but I like the satisfaction of fixing things myself.
Lol I didn't say send it to him. Call him and see if he has any ideas what it could be lol.

Re: m 1.0t dead quiet -grrrrr

Posted: Tue Mar 05, 2013 7:09 pm
by briandarflinger
Opps,, my bad.. Hopefully someone here can point me in the right direction.