m1.5t amp buzzing from both channels

If you have Carver repair questions, or can help other users with repairs, this is the place for it
Post Reply
zutroye

m1.5t amp buzzing from both channels

Post by zutroye » Mon Jul 22, 2013 11:47 am

Hi everyone,

I picked up a M1.5t from a garage sale this weekend. The amp works fine except for a loud buzzing coming from both speakers. The buzzing happens all the time (connected to preamp or not). When connected to the preamp, the buzz does not increase when the volume is increased. I know that the problem is not with the speakers, since they sound fine with a different amp.

Any ideas? I'd love to give this old amp some new life.

TIA
Zutroye

elgrau
SILVER-7 TUBE AMP
Posts: 2933
Joined: Wed May 31, 2006 9:33 pm

Re: m1.5t amp buzzing from both channels

Post by elgrau » Mon Jul 22, 2013 12:23 pm

Most likely a cap going bad somewhere. Send it to one of the shops mentioned here and have a re-furb done on the amp....will sound like a new amp and you'll be good to go with this amp for another 20 tears! - Ed
FR: 400 disk changer with PS Audio Digital Link III DAC; Technics SL-1100A TT. QED Quenx1 IC's from DAC & TT to Adcom GTP-602 preamp/Tuner. AudioQuest King Cobra IC's from preamp to M1.0t mk-II opt2. QED Silver Spirals 4M wires to EPI 1000’s.
LR: AudioEngine wireless link from family room preamp to Barcus-Berry 2002R Sonic Maximizer to GlowPower Zyxt IC's to Sunfire 300x2 to Nordost 6M bi-source wires to AOS 28" MDF spherical speakers using six 6.5" woofers and eight 1" dome tweeters symm. arranged around the surface.
SS system: CX-995V DVD to AV-634x 3-4 channel amp (center/rears) & M1.0t mk-II opt2(fronts).
Garage: 300 disk changer to Entech 202.5 DAC to MXR150 Receiver (pre) to TFM-42 to EPI 400 speakers.

Post Reply

Return to “CARVER Equipment Repair/Help Forum”