M1.5 Rear output BNC Jacks

If you have Carver repair questions, or can help other users with repairs, this is the place for it
Post Reply
User avatar
Roboter
Newbie
Posts: 40
Joined: Sat Sep 13, 2008 5:55 pm

M1.5 Rear output BNC Jacks

Post by Roboter » Thu Dec 25, 2008 9:33 pm

Anyone know where I can get a suitable, rear L/R input assembly replacement? PO had used a generic parts bin part in the stock opening; using plastic backing plate to make it fit.

Tried Rolland but he ain't parting with his parts. :(

Thanks
CM-1090
SD/A-360
M1.5
TX-8R
901 Series VI

“Nothing is true in self-discovery unless it is true in your own experience. This is the only protection against the robot levels of the mind.”

User avatar
OBI56
SILVER-7 TUBE AMP
Posts: 4885
Joined: Sat Oct 20, 2007 12:52 am
Location: You ... OFF MY PLANET!

Re: M1.5 Rear output BNC Jacks

Post by OBI56 » Thu Dec 25, 2008 11:22 pm

You may have to make up something custom with a small aluminium plate and suitable connectors of your choice.
Why let facts or common sense get in the way of your opinions.

Post Reply

Return to “CARVER Equipment Repair/Help Forum”