It is currently Thu Mar 23, 2017 1:20 am
If you have Carver repair questions, or can help other users with repairs, this is the place for it
Could it be a ground loop hum ? I had a really bad hum on a Crown DC-300A II amp I have and checking around about it, came across an article somewhere that recommended using a multi-strip, where it was just plugged straight into the wall.
Again, do not know if that is your problem, but it did work for me, went to a mult strip and the problem went away(when I say a multi strip, I am just talking about those power strips with multiple plugs on them, so you can plug 500 things into one outlet)
Joined: Wed Jun 06, 2007 8:29 pm
Location: The west's most mid-western town, Scottsdale, Arizona
There is a difference between hearing and listening...
Making life enjoyable through expensive electronics.
Carver: C-4000 & C-1 preamps, PSC-60 preamp/tuner, TX-11a tuner, M-400 (2), C-500, M-500, M-500t, M-500t Mk.II, A-500x, AL-III loudspeakers (2 pr.)
Sunfire:Theater Grand III processor, Ultimate Receiver, Cinema Grand Signature 400 ~ seven, True Subwoofer Mk. II, D-10 Subwoofer
Who is online
Users browsing this forum: Yahoo [Bot] and 2 guests