If you have Carver repair questions, or can help other users with repairs, this is the place for it
3 posts • Page 1 of 1
Can anyone tell me who repairs Carver DTL100 and DTL200 CD players. I have one of each, the DTL100, I know needs new belts and the DTL200 also needs belts but there are other issues with this one, like it will only read discs maybe 5% of the time if I'm lucky. Any help is much appreciated, I'd like to keep these 2 units alive if everyone knows what I mean.
- !! CarverFest Evictee !!
- Posts: 1381
- Joined: Tue Dec 30, 2008 3:05 pm
- Location: Pittsburgh, PA
The belts are an easy fix. Here is a great source for belts. The 200 problems can be a number of things. I think a belt is used for the tracking on these. Open it up and take a look at the transport.If the belt is sloppy, that will cause a read error. Also clean the laser.
Gunter the wonder dog is watching you...
Thanks I'll have to do that to the 200, also have to check out the belt lengths on the 100. Last time I had the covers off I thought the drive mechanisms were the same. I'll have to do that on the weekend, when no one is around to bother me.