Hello!

Just found us? Entering CarverAudio.com for the first time? Post your introductions here and say hi to all of the other Carver enthusiasts.
Post Reply
Paul Bell
Newbie
Posts: 3
Joined: Wed Jan 27, 2010 6:27 pm

Hello!

Post by Paul Bell » Wed Jan 27, 2010 6:35 pm

Hi all, I'm The New Guy.

I own a PCS50 and a PCS60. I have a DTL that's about to go up on ebay. In the '80's, I had a Phase Linear 700. In the 90's I had a M1.5 and a PM1.5.

I'm in need of a remote for my PCS60. Any ideas?

nooshinjohn
SILVER-7t
Posts: 1754
Joined: Fri Jan 30, 2009 8:54 pm

Re: Hello!

Post by nooshinjohn » Wed Jan 27, 2010 6:49 pm

what model DTL?


welcome to the club.
The Gear... Carver "Statement" Mono-blocks, Polk Audio "Signature" Reference Series 1.2TL with complete mods, Pass Labs X1 two channel preamplifier Signed by Poppa himself, Pioneer PDD 9MkII SACD Player, Triangle Art Reference SE prototype, with Walker Precision speed controller and Origin Conqueror tonearm and Dynaudio 20x2, Pass Labs Xono twin chassis phono preamplifier, Pioneer Elite SC-65, Polk audio AB700/800 "in-wall" surrounds, Oppo BDP-93

User avatar
kingman
(pair of) SILVER-7 TUBE AMPs
Posts: 6328
Joined: Sun Nov 30, 2008 2:10 pm
Location: Upstate South Carolina

Re: Hello!

Post by kingman » Wed Jan 27, 2010 7:30 pm

Welcome!!! What happened to the 700??? :-s
In reality, it only matters what it sounds like to YOU!!!

Paul Bell
Newbie
Posts: 3
Joined: Wed Jan 27, 2010 6:27 pm

Re: Hello!

Post by Paul Bell » Wed Jan 27, 2010 7:45 pm

It’s the TL3300. I have a friend who had worked at Carver back in the day. As I understand it, only half the CD players made it through the "play through the night" test. This one was a good one as I owned it from new but now it does everything perfectly except play a CD. If I was to play a CD at home, I run it through the DVD player.

The 700 went up in flames three times. They (Phase Linear) certainly spent more money fixing it under warranty that they could have made selling it to me.

I had a Carver pre-amp in the 80's but don't recall which one.

I own a mid-sized sound company in the NYC area. My amp of choice is QSC. My big subs are powered by Powerlight 9.0 amps, considered a dinosaur by today's standards.

Does anybody have any info on the PCS 50 & 60 pre-amps? I've scoured the internet and came up with nothing whatsoever.

Breaking Glass
M-400t CUBE
Posts: 113
Joined: Sat Oct 17, 2009 8:50 pm
Location: Missouri

Re: Hello!

Post by Breaking Glass » Thu Jan 28, 2010 8:47 am

welcome

User avatar
thuffman03
!! CarverFest Evictee !!
Posts: 2701
Joined: Fri Sep 19, 2008 10:07 am
Location: Pittsburgh, PA

Re: Hello!

Post by thuffman03 » Thu Jan 28, 2010 10:39 am

Welcome to the forum!
Some cool Carver stuff!

User avatar
TNRabbit
R.I.P. Friend
R.I.P. Friend
Posts: 13360
Joined: Sun Jan 14, 2007 11:53 am
Location: TN Native Languishing in VA
Contact:

Re: Hello!

Post by TNRabbit » Thu Jan 28, 2010 10:49 am

WELCOME, Paul~
TNRabbit
Image

From FrankieD's lips to your ears: Sunfire - a quiet box of endless power.

Sunfire TG-IV/400~7 Amp
Carver SD/A-360 CDP
Benchmark DAC-1
Sony SACD/DVD-A
Active bi-amp: Ashly XR-1001 & 2 Rane PEQ-15s
Main: HotRodded AL-IIIs
Sub: Klipsch RT-12d
Center: Sunfire CRS-3c
Surround: Sunfire CRS-3 (x 2)

OconeeOrange wrote:"Gary likes to play it 'loud' as do I. His system begs you turn it up until you die"

RIP WIlliam B. Dibble, 1948-2012. I'll miss you my friend.

User avatar
Toy Maker
Puppet Master
Posts: 6792
Joined: Wed Oct 08, 2003 1:26 am

Re: Hello!

Post by Toy Maker » Thu Jan 28, 2010 10:59 am

Rolland will probably have them

Carver Audio Repair Center
Hi-Tech Audio Ltd.
2125 SW 19th St.
Gresham Oregon 97080
503-618-7605 Fax 503-674-8593
http://www.carveraudiorepair.com

BB3
M-400t CUBE
Posts: 179
Joined: Tue Sep 15, 2009 1:20 pm
Location: Steubenville, Ohio

Re: Hello!

Post by BB3 » Thu Jan 28, 2010 3:45 pm

Welcome To The Forum Paul Bell.

You Could Also Check Out : www.vintagehifipgh.com

Take Care Paul And I Hope This Helps You Out.---------BILL(BB3)
Carver Gear : C-9, C-16, C-19, 4-TFM55's, 2-TFM35's, 1-TFM25, 2-Silver 7-T's, 490T.

Non Carver Gear : Anthem AVM50V, Anthem Pre2L, Sonic Frontiers SFCD-1, Denon DCD1560, Panasonic DMK23, Sony BDP-S350, Sony PS3, Sony 52" XBR-6, Sony 32" XBR-6, Nintendo Wii

Speakers : Polk Audio : SDA-SRS, SDA-SRS 1.2TL, SDA-CRS+, RTA-15TL, 3- Velodyne F-1500's

User avatar
engtaz
"TAZ"
Posts: 5360
Joined: Sat Jun 30, 2007 1:43 pm
Location: Tampa, FL

Re: Hello!

Post by engtaz » Thu Jan 28, 2010 7:31 pm

Welcome
engtaz


Carver M4.0T in front channels to Caver AL VI's in SACD & 2 Channel setup
C 16, PT 2400, Slim Device, Carver TX-8, 490T and Rega TT w Grado Gold cart in the 2 channel setup
Bogen SRB20 is computer amp
Carver PM-350 donated for youth church use

User avatar
BillD
R.I.P. Friend
R.I.P. Friend
Posts: 7126
Joined: Wed Jun 06, 2007 8:29 pm
Location: The west's most mid-western town, Scottsdale, Arizona

Re: Hello!

Post by BillD » Thu Jan 28, 2010 7:43 pm

IIRC, the PSC-60 is just the pro version of the CT-6 (drilled for rack mounting). I've always wanted one, but have missed a couple of opportunities to get one at $100.
It should sound like it isn't there!
There is a difference between hearing and listening...
Making life enjoyable through expensive electronics.
_________________
Carver: C-4000 & C-1 preamps, PSC-60 preamp/tuner, TX-11a tuner, M-400 (2), C-500, M-500, M-500t, M-500t Mk.II, A-500x, AL-III loudspeakers (2 pr.)
Sunfire:Theater Grand III processor, Ultimate Receiver, Cinema Grand Signature 400 ~ seven, True Subwoofer Mk. II, D-10 Subwoofer

Paul Bell
Newbie
Posts: 3
Joined: Wed Jan 27, 2010 6:27 pm

Re: Hello!

Post by Paul Bell » Thu Jan 28, 2010 8:15 pm

Thanks for the ideas guys and for making me feel welcome.

I suppose I'll need a remote for a CT-6 for my PCS60? I'm starting to think my PCS60 & PCS50 are kinda rare. I don't even recall how I came about owning them. I might have the owners manual for the 60 somewhere. The phono input on the PCS50 went, one channel at a time. These preamps are what I use when testing turntables. I re-furbish about eight Technics SL1200MKxx turntables a month.

kingman, to fully answer your question, I have no clue what happened to the PL700 from decades ago. I would imagine it's been recycled into a Toyota fender or something.

In the pro audio world, there's a few PM1.5's still out there earning pay. Various mods and component substitutions have been made to keep them going, some mods that make them better. Here's a tease for you Carver Heads:
Image

Post Reply

Return to “"The Welcome Mat"”