New Member in Vancouver, B.C.

Just found us? Entering CarverAudio.com for the first time? Post your introductions here and say hi to all of the other Carver enthusiasts.
Post Reply
rfj5106
Newbie
Posts: 2
Joined: Thu Apr 22, 2010 2:55 pm

New Member in Vancouver, B.C.

Post by rfj5106 » Thu Apr 22, 2010 3:12 pm

Hello everyone. A long time Carver fan. Have A500x and a TFM-15CB, CT-3 (alas not working) and a MV-5 (also not working). I need a competent repair technician. Last place I took the CT-3 to,fixed it, but within a month, it had stopped working, returned it and supposedly repaired but it stopped working again. So if you can recommend a competent technician in Vancouver I would appreciate it. One of the meters on my TFM-15 has frozen--any ideas on replacement or repair?

User avatar
helicopterpilotdoug
(pair of) SILVER-7t's
Posts: 2200
Joined: Sun Mar 21, 2010 8:04 pm
Location: Austin TX
Contact:

Re: New Member in Vancouver, B.C.

Post by helicopterpilotdoug » Thu Apr 22, 2010 3:42 pm

rfj5106 wrote:Hello everyone. A long time Carver fan. Have A500x and a TFM-15CB, CT-3 (alas not working) and a MV-5 (also not working). I need a competent repair technician. Last place I took the CT-3 to,fixed it, but within a month, it had stopped working, returned it and supposedly repaired but it stopped working again. So if you can recommend a competent technician in Vancouver I would appreciate it. One of the meters on my TFM-15 has frozen--any ideas on replacement or repair?
Welcome to the forum. There are a couple of repair companies not far from you in The States. There is also one listed in Vancouver. See this forum for some information. viewforum.php?f=4
Sunfire: Theater Grand IV, Cinema Grand Signature.
Carver: TFM-45, PST-24 Cassette, Extra Carver Gear: CT-6, C-11 (S/N 00001).
Polk Audio: Mains SRS 2.1TL, Center CSiA6, Surrounds FXiA6 and FXiA4, Sub DSW MicroPro 1000, Extra Speakers SDA 2A, SDA 2Btl, Monitor 10A.
Turntable: Dual CS 714Q
Bluray/SACD: Oppo BDP 83SE
CD: Sony 330 300 Disk changer

http://www.douglasconnection.com

User avatar
thuffman03
!! CarverFest Evictee !!
Posts: 2701
Joined: Fri Sep 19, 2008 10:07 am
Location: Pittsburgh, PA

Re: New Member in Vancouver, B.C.

Post by thuffman03 » Thu Apr 22, 2010 3:59 pm

Welcome to the forum!
Some cool Carver stuff!

User avatar
kingman
(pair of) SILVER-7 TUBE AMPs
Posts: 6359
Joined: Sun Nov 30, 2008 2:10 pm
Location: Upstate South Carolina

Re: New Member in Vancouver, B.C.

Post by kingman » Thu Apr 22, 2010 4:05 pm

Welcome!!! =D> =D> =D>
In reality, it only matters what it sounds like to YOU!!!

User avatar
engtaz
"TAZ"
Posts: 5384
Joined: Sat Jun 30, 2007 1:43 pm
Location: Tampa, FL

Re: New Member in Vancouver, B.C.

Post by engtaz » Thu Apr 22, 2010 4:36 pm

Welcome
engtaz


Carver M4.0T in front channels to Caver AL VI's in SACD & 2 Channel setup
C 16, PT 2400, Slim Device, Carver TX-8, 490T and Rega TT w Grado Gold cart in the 2 channel setup
Bogen SRB20 is computer amp
Carver PM-350 donated for youth church use

nmmac4842
Newbie
Posts: 14
Joined: Thu Apr 01, 2010 7:21 pm
Location: AZ. USA

Re: New Member in Vancouver, B.C.

Post by nmmac4842 » Thu Apr 22, 2010 5:09 pm

welcome. ts-s30, ts-m30. nmm

rfj5106
Newbie
Posts: 2
Joined: Thu Apr 22, 2010 2:55 pm

Re: New Member in Vancouver, B.C.

Post by rfj5106 » Sat May 22, 2010 11:50 pm

Thanks for the warm welcome!

Post Reply

Return to “"The Welcome Mat"”