Just found us? Entering CarverAudio.com for the first time? Post your introductions here and say hi to all of the other Carver enthusiasts.
Post Reply
Posts: 3
Joined: Thu Jul 15, 2010 8:37 pm


Post by madisonhack » Thu Jul 15, 2010 8:46 pm

I'm brand new here. The reason I've registered is because I'm I'm a technician looking for a schematic on a Carver CM 2002 - I've gone as far as I can without one. It appears to have a problem in the preamp. I replaced the 5 volt 7805 regulator on the board and that got me my 5 volts back, but the signal from none of the inputs is making it to the preamp output. The power amp section seems to work.

Does anybody have a good source for schematics and manuals on Carvers (or other vintage equipment) because I'm going to hopefully be doing lots of work on older equipment.


User avatar
(pair of) SILVER-7 TUBE AMPs
Posts: 6383
Joined: Sun Nov 30, 2008 2:10 pm
Location: Upstate South Carolina

Re: Hello

Post by kingman » Thu Jul 15, 2010 9:10 pm

I don't
In reality, it only matters what it sounds like to YOU!!!

Post Reply

Return to “"The Welcome Mat"”