Hello

Just found us? Entering CarverAudio.com for the first time? Post your introductions here and say hi to all of the other Carver enthusiasts.
Post Reply
madisonhack
Newbie
Posts: 3
Joined: Thu Jul 15, 2010 8:37 pm

Hello

Post by madisonhack » Thu Jul 15, 2010 8:46 pm

I'm brand new here. The reason I've registered is because I'm I'm a technician looking for a schematic on a Carver CM 2002 - I've gone as far as I can without one. It appears to have a problem in the preamp. I replaced the 5 volt 7805 regulator on the board and that got me my 5 volts back, but the signal from none of the inputs is making it to the preamp output. The power amp section seems to work.

Does anybody have a good source for schematics and manuals on Carvers (or other vintage equipment) because I'm going to hopefully be doing lots of work on older equipment.

Thanks.
Top
User avatar
kingman
(pair of) SILVER-7 TUBE AMPs
Posts: 6359
Joined: Sun Nov 30, 2008 2:10 pm
Location: Upstate South Carolina

Re: Hello

Post by kingman » Thu Jul 15, 2010 9:10 pm

I don't
In reality, it only matters what it sounds like to YOU!!!
Top
Post Reply

Return to “"The Welcome Mat"”