Hello from the new guy!

Just found us? Entering CarverAudio.com for the first time? Post your introductions here and say hi to all of the other Carver enthusiasts.
Soundman
Newbie
Posts: 4
Joined: Thu Oct 28, 2010 2:15 pm

Hello from the new guy!

Post by Soundman » Fri Oct 29, 2010 5:34 am

Hello everyone!
I've been searching, high and low, for information on my latest purchase and found this forum.
Hope to get enough time to dig around and learn a bit more about Carver equipment.
I'm awaiting a Carver CM-1040 and really hoping it will live up to the name. :)

I've lusted over Carver since the 80's but could never find or afford it.

Hope somebody can help me out with some information about this unit.

User avatar
kingman
(pair of) SILVER-7 TUBE AMPs
Posts: 6338
Joined: Sun Nov 30, 2008 2:10 pm
Location: Upstate South Carolina

Re: Hello from the new guy!

Post by kingman » Fri Oct 29, 2010 5:55 am

WELCOME SOUNDMAN!!! =D> =D> =D> You're at the right place...alot of good people here to steer you along the road to OCCD!!!
In reality, it only matters what it sounds like to YOU!!!

User avatar
TNRabbit
R.I.P. Friend
R.I.P. Friend
Posts: 13360
Joined: Sun Jan 14, 2007 11:53 am
Location: TN Native Languishing in VA
Contact:

Re: Hello from the new guy!

Post by TNRabbit » Fri Oct 29, 2010 6:49 am

WELCOME~
TNRabbit
Image

From FrankieD's lips to your ears: Sunfire - a quiet box of endless power.

Sunfire TG-IV/400~7 Amp
Carver SD/A-360 CDP
Benchmark DAC-1
Sony SACD/DVD-A
Active bi-amp: Ashly XR-1001 & 2 Rane PEQ-15s
Main: HotRodded AL-IIIs
Sub: Klipsch RT-12d
Center: Sunfire CRS-3c
Surround: Sunfire CRS-3 (x 2)

OconeeOrange wrote:"Gary likes to play it 'loud' as do I. His system begs you turn it up until you die"

RIP WIlliam B. Dibble, 1948-2012. I'll miss you my friend.

User avatar
engtaz
"TAZ"
Posts: 5372
Joined: Sat Jun 30, 2007 1:43 pm
Location: Tampa, FL

Re: Hello from the new guy!

Post by engtaz » Fri Oct 29, 2010 7:12 am

Welcome
engtaz


Carver M4.0T in front channels to Caver AL VI's in SACD & 2 Channel setup
C 16, PT 2400, Slim Device, Carver TX-8, 490T and Rega TT w Grado Gold cart in the 2 channel setup
Bogen SRB20 is computer amp
Carver PM-350 donated for youth church use

User avatar
thuffman03
!! CarverFest Evictee !!
Posts: 2701
Joined: Fri Sep 19, 2008 10:07 am
Location: Pittsburgh, PA

Re: Hello from the new guy!

Post by thuffman03 » Fri Oct 29, 2010 8:24 am

Welcome to the forum!
Some cool Carver stuff!

Soundman
Newbie
Posts: 4
Joined: Thu Oct 28, 2010 2:15 pm

Re: Hello from the new guy!

Post by Soundman » Sat Oct 30, 2010 2:10 am

Thanks for the "welcome". :)

angelod307
SILVER-7 TUBE AMP
Posts: 2652
Joined: Sat Jun 06, 2009 10:56 pm
Location: manning, sc

Re: Hello from the new guy!

Post by angelod307 » Sat Oct 30, 2010 2:47 am

what they said....
CarverFest: I just go for the arts and crafts

User avatar
helicopterpilotdoug
(pair of) SILVER-7t's
Posts: 2200
Joined: Sun Mar 21, 2010 8:04 pm
Location: Austin TX
Contact:

Re: Hello from the new guy!

Post by helicopterpilotdoug » Sat Oct 30, 2010 5:51 am

\:D/ WELCOME TO THE FORUM!! \:D/
Sunfire: Theater Grand IV, Cinema Grand Signature.
Carver: TFM-45, PST-24 Cassette, Extra Carver Gear: CT-6, C-11 (S/N 00001).
Polk Audio: Mains SRS 2.1TL, Center CSiA6, Surrounds FXiA6 and FXiA4, Sub DSW MicroPro 1000, Extra Speakers SDA 2A, SDA 2Btl, Monitor 10A.
Turntable: Dual CS 714Q
Bluray/SACD: Oppo BDP 83SE
CD: Sony 330 300 Disk changer

http://www.douglasconnection.com

User avatar
treitz3
"Julian"
"Julian"
Posts: 7805
Joined: Mon Oct 16, 2006 5:39 pm
Location: The tube lair in Charlotte, NC

Re: Hello from the new guy!

Post by treitz3 » Sat Oct 30, 2010 9:33 am

Welcome home.
In search of accurate reproduction of music. Real sound is my reference and while perfection may not be attainable? If I chase it, I might just catch excellence.

The best way to enjoy digital music reproduction is to never listen to a good analogue reproduction.

User avatar
Zoot Horn
SILVER-7 TUBE AMP
Posts: 3550
Joined: Thu Nov 15, 2007 7:26 pm
Location: 4th Tower of Inverness

Re: Hello from the new guy!

Post by Zoot Horn » Sat Oct 30, 2010 11:13 am

welcome to the machine

Jazzman53
M-400t CUBE
Posts: 132
Joined: Mon Oct 05, 2009 10:37 am

Re: Hello from the new guy!

Post by Jazzman53 » Mon Nov 01, 2010 8:07 pm

Welcome Soundman,
Like you, I too lusted in the 80's but couldn't afford Carvers back then. It's great that we pick up Carvers for a relative song now, don't you think?

Soundman
Newbie
Posts: 4
Joined: Thu Oct 28, 2010 2:15 pm

Re: Hello from the new guy!

Post by Soundman » Tue Nov 02, 2010 3:27 pm

Jazzman53 wrote:Welcome Soundman,
Like you, I too lusted in the 80's but couldn't afford Carvers back then. It's great that we pick up Carvers for a relative song now, don't you think?
Too right!! Bad part is that I want to locate MORE! ;)

Asoundpainter
Newbie 50+
Posts: 89
Joined: Wed Mar 10, 2010 8:42 pm

Re: Hello from the new guy!

Post by Asoundpainter » Tue Nov 02, 2010 4:28 pm

Welcome Soundman and join the club!

User avatar
Scarabeo
SILVER-7 TUBE AMP
Posts: 2608
Joined: Tue Nov 18, 2008 6:05 pm

Re: Hello from the new guy!

Post by Scarabeo » Tue Nov 02, 2010 4:59 pm

Soundman wrote:
Jazzman53 wrote:Welcome Soundman,
Like you, I too lusted in the 80's but couldn't afford Carvers back then. It's great that we pick up Carvers for a relative song now, don't you think?
Too right!! Bad part is that I want to locate MORE! ;)
And more and more and more,,,OK I am getting off track so WELCOME!!!
BillD, You will be forever with us! RIP until we meet again on the other side...

User avatar
beemers417
!! CarverFest Evictee !!
Posts: 1381
Joined: Tue Dec 30, 2008 3:05 pm
Location: Pittsburgh, PA
Contact:

Re: Hello from the new guy!

Post by beemers417 » Tue Nov 02, 2010 5:42 pm

Welcome to the club!!! \:D/ \:D/ \:D/
Gunter the wonder dog is watching you...

Post Reply

Return to “"The Welcome Mat"”