FAQ  •  Register   •  Gallery •  Login

It is currently Fri Apr 18, 2014 10:39 am

Power conditioner




Posts: 24

Joined: Tue Feb 18, 2014 8:47 am

Location: Brazil

Post Sun Feb 23, 2014 1:57 pm

Power conditioner

In these parts, power failures are sometimes a daily occurrence, especially in summer when there are many electrical storms. Power surges are common - we've had some cable equipment break in the past here in our apartment. Just about everyone uses a power conditioner on home theatre equipment and a no-break is essential for desktop computers. While I wait for for a Sunfire Signature stereo amp to arrive to put in a small studio I'm building, I've been investigating getting an affordable power conditioner. The models here generally include surge guards and line filters.

Just did a search on conditioners together with carver amps and found this in an old thread on another site:

"And remember, Bob Carver highly recommends plugging his amps directly into the wall outlet and to never use a power conditioner or god forbid a power strip. He believes they will not be able to supply the current peaks when needed."

I wonder if anyone here has any comments on conditioners and the environment here?

If I do go ahead and get one I'll need to find one that can provide sufficient current. Could someone please confirm that my reasoning in the following is correct (I know very little about electronics):

The sunfire sig. 600 has a max power consumption of 1800W. Here we have 220v power and fortunately the amp I'm receiving is a 220v model. So unless there's some scaling factor involved this means the amp can draw a maximum of 1800 / 220 = 8.2 amps. The power ratings for power conditioners are given in kVA and a model I'm interested in getting has a rating of 2.2 kVA. I think that means that it can provide 10 amps (2.2*1000/220 = 10) - and that this should be sufficient for anything the amp would require (and I'm never going to
drive the amp very hard). Is this correct?

I'm moving house shortly and I'll also consider getting an independent mains line put in for this new studio.



User avatar

(pair of) SILVER-7 TUBE AMPs

Posts: 13258

Joined: Sun Jan 14, 2007 11:53 am

Location: TN Native Languishing in VA

Post Sun Feb 23, 2014 2:53 pm

Re: Power conditioner

Makes sense.

From FrankieD's lips to your ears: Sunfire - a quiet box of endless power.

Sunfire TG-IV/400~7 Amp
Carver SD/A-360 CDP
Benchmark DAC-1
Active bi-amp: Ashly XR-1001 & 2 Rane PEQ-15s
Main: HotRodded AL-IIIs
Sub: Klipsch RT-12d
Center: Sunfire CRS-3c
Surround: Sunfire CRS-3 (x 2)

OconeeOrange wrote:"Gary likes to play it 'loud' as do I. His system begs you turn it up until you die"

RIP WIlliam B. Dibble, 1948-2012. I'll miss you my friend.


User avatar


Posts: 4533

Joined: Tue Nov 11, 2003 3:31 am

Location: The Mars Hotel

Post Mon Feb 24, 2014 1:19 am

Re: Power conditioner

IMO, a good power conditioner should be able to pass 20 amps, but more importantly, not limit current.
Political Correctness...defined

A doctrine fostered by a delusional, illogical minority and rabidly promoted by an unscrupulous mainstream media, which holds forth the proposition that it is entirely possible to pick up a turd by the clean end.

In a recent press conference, President Obama remarked, "If I had a city, it would look just like Detroit."



Posts: 24

Joined: Tue Feb 18, 2014 8:47 am

Location: Brazil

Post Mon Feb 24, 2014 6:16 am

Re: Power conditioner

220v AV power conditioners are hard to come by as most of the big cities are 110v. There's a model with a 220v version and a 110v version that is vaguely affordable - the 110v gives 30amps but the 220v version gives only 15amps. I guess an amp is an amp in this context or would the requirement be lower in a 220v system? This unit is more than double the price of the 220v/10amp unit that I described earlier.

Here is a pdf of the 30/15amp model: http://upsai.com.br/Imagens/pdf/audio_video/acf3100.pdf

the smaller 10amp model is here: http://upsai.com.br/Imagens/PDFs/av/acf_2500.pdf



User avatar

Newbie 50+

Posts: 64

Joined: Thu Feb 20, 2014 8:45 am

Location: East Virginia

Post Mon Feb 24, 2014 8:25 am

Re: Power conditioner

F1nut wrote:IMO, a good power conditioner should be able to pass 20 amps, but more importantly, not limit current.

@F1Nut- Please forgive me if I don't understand your comment: How could something "pass" required current, but at the same time unacceptably limit it? Are you considering the OP is using 220V, not 110V? Or do you set the bar at 40 amps for 110V equipment? :-k

Everything limits current, to one degree or another. A rule of thumb (and often specified or codified) for voltage drop is no more than 5%.

I recall on one CF video, in the Q&A Bob said any conditioner is fine, even for one of his amps, as long as it was rated appropriately. He cautioned, as has been mentioned here already, that appropriate conditioners aren't as easy to find.

@surdo - Sounds good to me. And when in doubt, go bigger!
Current setup: Random Naked Amps Piled on Floor and/or Wedged Into Shelves

Don't call amp mutilators "butchers"- butchers are highly skilled professionals.

Return to Carver Home (Audio)

Who is online

Users browsing this forum: No registered users and 1 guest

Powered by phpBB © 2011 phpBB Group.