What are the specs for this receiver?

This receiver was given to me at work a few days ago and I havne't been able to find any specs for it. There's no model number or anything on it...



thanks for any help

I believe the receiver in question is the aptly named THE CARVER RECEIVER. The specifications for the unit are given below.

Power: 150W/channel in 8 ohms with < .05% THD
Slew factor: > 80
Freq response: 1Hz - 30Khz +/- 1db
Protection: Short circuit, DC offset, low/high frequency trip

FM Tuner
S/N: 76db
distortion: .2%
freq response: 20 - 15Khz +/- 1db
stereo seperation: 42db
capture ratio: 1.5db
Noise reduction: 7db
Multipath reduction: 13db

PREAMP

Distortion: .05%
S/N: 90db
Freq Response: 20hz - 20Khz +/- .5db

Good luck

Cool cool....

You think I can use it to power a 12" DVC subwoofer with coils rated at 4 ohms each?

You should be able to drive the 4 ohm load, power should be around 200- 220 W/channel max.

Might be the 130wpc version , which was the original "Carver Receiver". The 150wpc (157 actually) version was sometimes called "The Receiver 150".

It'll do 4 ohms just fine. You have some fine co-workers.