Hi-Tech Audio (Carver Equipment Repair)

Rolland · Post by **Rolland** » Fri Dec 18, 2009 3:51 am

Just dropping to say hi. Hope all you Carver fans are doing well. Just wanted to update everyone on the shop. We are still doing great and have many happy customers. Are prices are still the same for the total chassis refresh. $299.00 total recap plus all repairs and update on all M series amplifiers and all TFM series amplifiers less the TFM-75 as they are basically mono block in one package so they are more $$ for total recap. We hope all are getting through this rotten economy its getting a bit on the ugly side. If anyone is interested in a special offer we are doing some free upgrades for January and February the upgrades are polypropylene bypass capacitors in the analog preamps such as the C-1 C-2 and all the amplifiers. Also if on a budget we can offer a lower rate on repairs if you just want repairs, they will be in the neighborhood of $179.00 to $229.00 plus shipping. The chassis refresh is still the best way to go but if we can trim some dollars to help out we are happy to do so. Take care. PS I will try to stop in more often but we have been quite busy. Thanks again for all your support.

Sincerely,
Rolland

Carver Audio Repair Center
Hi-Tech Audio Ltd.
2125 SW 19th St.
Gresham Oregon 97080
503-618-7605 Fax 503-674-8593
http://www.carveraudiorepair.com

m1.5tman · Post by **m1.5tman** » Fri Dec 18, 2009 4:14 am

Thank you for the update, Rolland. My 1.5t is running strong and sounds great. Thanks again.

engtaz · Post by **engtaz** » Fri Dec 18, 2009 4:39 am

Thanks for the update.

kingman · Post by **kingman** » Fri Dec 18, 2009 6:57 am

Great to see the post Rolland!!! Thanks for "being there" to repair out Carver stuff!!!

BillD · Post by **BillD** » Fri Dec 18, 2009 9:38 am

Good to hear from you Rolland. Glad you checked in. Happy Holidays.

gdb · Post by **gdb** » Fri Dec 18, 2009 11:51 am

I have a TFM-55 coming your way in January! $\:D/$

frankieD · Post by **frankieD** » Fri Dec 18, 2009 12:15 pm

Hi Rolland, nice to hear from you.

I sold my TFM42 that you refurbed for me, to another member & got a good price because it (the amp) had been "Rollandized".

He is very happy with it & it continues to perform flawlessly.

Glad things are busy for you.

Have a great Christmas & even better New Year.

FrankieD

erniejade1 · Post by **erniejade1** » Fri Dec 18, 2009 2:16 pm

Great to hear from you! The C-19 is still running fantastic! I hope you have a great Holiday!

Rolland · Post by **Rolland** » Fri Dec 18, 2009 3:17 pm

m1.5tman wrote:Thank you for the update, Rolland. My 1.5t is running strong and sounds great. Thanks again.

Thanks for the business and the feedback. Talk to you soon. Rolland

Rolland · Post by **Rolland** » Fri Dec 18, 2009 3:19 pm

kingman wrote:Great to see the post Rolland!!! Thanks for "being there" to repair out Carver stuff!!!

Its been a while. Happy to help keep the good stuff running. Enjoy the music! Rolland

Rolland · Post by **Rolland** » Fri Dec 18, 2009 3:21 pm

gdb wrote:I have a TFM-55 coming your way in January! $\:D/$

Look forward to restoring the amp. Talk to you soon. Rolland

ArthurFromCanada · Post by **ArthurFromCanada** » Tue Jan 05, 2010 11:24 pm

m1.5tman wrote:Thank you for the update, Rolland. My 1.5t is running strong and sounds great. Thanks again.

Hi "m1.5tman", did you notice a large difference in the sound / musicality of the amp when you got it back? Rolland will be restoring my m-1.5t later this month.

Thanks,
Art

m1.5tman · Post by **m1.5tman** » Wed Jan 06, 2010 4:25 am

ArthurFromCanada wrote:
m1.5tman wrote:Thank you for the update, Rolland. My 1.5t is running strong and sounds great. Thanks again.
Hi "m1.5tman", did you notice a large difference in the sound / musicality of the amp when you got it back? Rolland will be restoring my m-1.5t later this month.

Thanks,
Art

I can't remember specifically what all was done, but I can say the sound stage did increase. You won't be disappointed.

edriz · Post by **edriz** » Wed Jan 06, 2010 8:16 am

Do you offer discounts on multipe pieces?

I have a M-400, M-400a and a C-1 that I want restored/ refurbished. Both the M-400 and the M-400a are in service now and sound great but lets face it, thay are old and need a face lift. My precious M-400a I bought brand new and is my pride and joy. The M-400 is an ebay find that I'm going to use while the 400a is being worked on. When the a comes back the C-1 goes for restoring, which I also bought brand new. Another of my Carver pieces that I cherish. The C-1 has a DC current issue? I have a second C-1, also an Ebay find I can use while I await my original C-1 to come home. Confused yet. I can't be without my Carver $\:D/$ ( The Ebay C-1 will NOT be getting a facelift) Now once my original C-1 comes home, I will be sending my Ebay M-400 for restoration/refurbishing.

I have always wanted 2 M-400's. Now I will have a M-400a, and the C-1 that were bought brand new in 81, my most prized possesions totallt restored plus the M-400 totally restored that will last me my lifetime. What more can I ask? But at $299 each ouch, for someone like me on a fixed income. I want to try to do one piece a month as I'm on disability but $300 plus 2 way shipping.

I'm sure gonna try thats for sure. I need my Carver gear restored. I can't wait to hear them like new again.

Anyway, Rolland, if ya happen to pop in, maybe you could PM me and make me a muliti item deal?

TNRabbit · Post by **TNRabbit** » Wed Jan 06, 2010 10:15 am

edriz wrote:Do you offer discounts on multipe pieces? I have a M-400, M-400a and a C-1 that I want restored/ refurbished. Both the M-400 and the M-400a are in service now and sound great but lets face it, thay are old and need a face lift. My precious M-400a I bought brand new and is my pride and joy. The M-400 is an ebay find that I'm going to use while the 400a is being worked on. When the a comes back the C-1 goes for restoring, which I also bought brand new. Another of my Carver pieces that I cherish. The C-1 has a DC current issue? I have a second C-1, also an Ebay find I can use while I await my original C-1 to come home. Confused yet. I can't be without my Carver $\:D/$ ( The Ebay C-1 will NOT be getting a facelift) Now once my original C-1 comes home, I will be sending my Ebay M-400 for restoration/refurbishing.

I have always wanted 2 M-400's. Now I will have a M-400a, and the C-1 that were bought brand new in 81, my most prized possesions totallt restored plus the M-400 totally restored that will last me my lifetime. What more can I ask? But at $299 each ouch, for someone like me on a fixed income. I want to try to do one piece a month as I'm on disability but $300 plus 2 way shipping. I'm sure gonna try thats for sure. I need my Carver gear restored. I can't wait to hear them like new again. Anyway, Rolland, if ya happen to pop in, maybe you could PM me and make me a muliti item deal?

Ed, you need to PM this to Rolland or he probably won't see it~

CarverAudio.com

Hi-Tech Audio (Carver Equipment Repair)

Hi-Tech Audio (Carver Equipment Repair)

Re: Hi-Tech Audio

Re: Hi-Tech Audio

Re: Hi-Tech Audio

Re: Hi-Tech Audio

Re: Hi-Tech Audio (Carver Equipment Repair)

Re: Hi-Tech Audio (Carver Equipment Repair)

Re: Hi-Tech Audio (Carver Equipment Repair)

Re: Hi-Tech Audio

Re: Hi-Tech Audio

Re: Hi-Tech Audio (Carver Equipment Repair)

Re: Hi-Tech Audio

Re: Hi-Tech Audio

Re: Hi-Tech Audio (Carver Equipment Repair)

Re: Hi-Tech Audio (Carver Equipment Repair)