Shipping to Carverfest, what is the address?

The 5th Annual CarverFest Sep. 9th - 19th
Post Reply
User avatar
engtaz
"TAZ"
Posts: 5421
Joined: Sat Jun 30, 2007 1:43 pm
Location: Tampa, FL

Shipping to Carverfest, what is the address?

Post by engtaz » Mon Sep 05, 2011 2:42 am

Shipping to Carverfest, what is the address to ship it too?
engtaz


Carver M4.0T in front channels to Caver AL VI's in SACD & 2 Channel setup
C 16, PT 2400, Slim Device, Carver TX-8, 490T and Rega TT w Grado Gold cart in the 2 channel setup
Bogen SRB20 is computer amp
Carver PM-350 donated for youth church use
Top
Eddie
Eddie The Knife
Posts: 1805
Joined: Sun May 15, 2005 7:03 pm
Location: Valhalla! Expect me when you see me!

Re: Shipping to Carverfest, what is the address?

Post by Eddie » Mon Sep 05, 2011 4:27 am

Roy are you up all night again ! LOL!
Don't waste a good opportunity to shut up!

Good judgment comes from experience, but experience usually comes from bad judgment.

The best thing is to learn from others that have mastered the one thing you need to learn!

I would tell you to go to hell but I already work there and I don't want to see your ugly face every day!
Top
User avatar
engtaz
"TAZ"
Posts: 5421
Joined: Sat Jun 30, 2007 1:43 pm
Location: Tampa, FL

Re: Shipping to Carverfest, what is the address?

Post by engtaz » Mon Sep 05, 2011 4:36 am

Work
engtaz


Carver M4.0T in front channels to Caver AL VI's in SACD & 2 Channel setup
C 16, PT 2400, Slim Device, Carver TX-8, 490T and Rega TT w Grado Gold cart in the 2 channel setup
Bogen SRB20 is computer amp
Carver PM-350 donated for youth church use
Top
Eddie
Eddie The Knife
Posts: 1805
Joined: Sun May 15, 2005 7:03 pm
Location: Valhalla! Expect me when you see me!

Re: Shipping to Carverfest, what is the address?

Post by Eddie » Mon Sep 05, 2011 4:45 am

157-645 State Road 1113, Bryson City, NC 28713

This is what James had for Google earth location but you would have to ask him or call TIM I guess!
Don't waste a good opportunity to shut up!

Good judgment comes from experience, but experience usually comes from bad judgment.

The best thing is to learn from others that have mastered the one thing you need to learn!

I would tell you to go to hell but I already work there and I don't want to see your ugly face every day!
Top
User avatar
engtaz
"TAZ"
Posts: 5421
Joined: Sat Jun 30, 2007 1:43 pm
Location: Tampa, FL

Re: Shipping to Carverfest, what is the address?

Post by engtaz » Mon Sep 05, 2011 4:54 am

Thanks. Is that their office?
engtaz


Carver M4.0T in front channels to Caver AL VI's in SACD & 2 Channel setup
C 16, PT 2400, Slim Device, Carver TX-8, 490T and Rega TT w Grado Gold cart in the 2 channel setup
Bogen SRB20 is computer amp
Carver PM-350 donated for youth church use
Top
treitz3
"Julian"
"Julian"
Posts: 7809
Joined: Mon Oct 16, 2006 5:39 pm
Location: The tube lair in Charlotte, NC

Re: Shipping to Carverfest, what is the address?

Post by treitz3 » Mon Sep 05, 2011 5:00 am

Gonna have to call them, Roy. Remember, they were moving the office last year. The address provided may not be up to date. The office is now actually located just below the Watershed cabins at the bottom of the mountain.
In search of accurate reproduction of music. Real sound is my reference and while perfection may not be attainable? If I chase it, I might just catch excellence.

The best way to enjoy digital music reproduction is to never listen to a good analogue reproduction.
Top
User avatar
engtaz
"TAZ"
Posts: 5421
Joined: Sat Jun 30, 2007 1:43 pm
Location: Tampa, FL

Re: Shipping to Carverfest, what is the address?

Post by engtaz » Mon Sep 05, 2011 5:25 am

Thanks
engtaz


Carver M4.0T in front channels to Caver AL VI's in SACD & 2 Channel setup
C 16, PT 2400, Slim Device, Carver TX-8, 490T and Rega TT w Grado Gold cart in the 2 channel setup
Bogen SRB20 is computer amp
Carver PM-350 donated for youth church use
Top
User avatar
Toy Maker
Puppet Master
Posts: 6873
Joined: Wed Oct 08, 2003 1:26 am

Re: Shipping to Carverfest, what is the address?

Post by Toy Maker » Mon Sep 05, 2011 7:56 am

Ship to:

James Sauter / CarverFest /Watershed #12
137 W. Watershed Rd.
Bryson City, NC 28713
Top
User avatar
engtaz
"TAZ"
Posts: 5421
Joined: Sat Jun 30, 2007 1:43 pm
Location: Tampa, FL

Re: Shipping to Carverfest, what is the address?

Post by engtaz » Mon Sep 05, 2011 8:22 am

Thanks
engtaz


Carver M4.0T in front channels to Caver AL VI's in SACD & 2 Channel setup
C 16, PT 2400, Slim Device, Carver TX-8, 490T and Rega TT w Grado Gold cart in the 2 channel setup
Bogen SRB20 is computer amp
Carver PM-350 donated for youth church use
Top
User avatar
Zoot Horn
SILVER-7 TUBE AMP
Posts: 3598
Joined: Thu Nov 15, 2007 7:26 pm
Location: 4th Tower of Inverness

Re: Shipping to Carverfest, what is the address?

Post by Zoot Horn » Mon Sep 05, 2011 8:50 am

Roy,, don't do like I did last year,,I was expecting a power supply for the Beacon,and it was shipped to the office(PO Box),,with delivery confirmation,,,long story short--it went back to the sender,cause no one was present to sign for iut,,go figure.
Top
User avatar
engtaz
"TAZ"
Posts: 5421
Joined: Sat Jun 30, 2007 1:43 pm
Location: Tampa, FL

Re: Shipping to Carverfest, what is the address?

Post by engtaz » Mon Sep 05, 2011 9:52 am

You know James ranks higher then me and you. :lol: :lol:
and they moved the office last year. The office is now actually located just below the Watershed cabins at the bottom of the mountain.
engtaz


Carver M4.0T in front channels to Caver AL VI's in SACD & 2 Channel setup
C 16, PT 2400, Slim Device, Carver TX-8, 490T and Rega TT w Grado Gold cart in the 2 channel setup
Bogen SRB20 is computer amp
Carver PM-350 donated for youth church use
Top
User avatar
Zoot Horn
SILVER-7 TUBE AMP
Posts: 3598
Joined: Thu Nov 15, 2007 7:26 pm
Location: 4th Tower of Inverness

Re: Shipping to Carverfest, what is the address?

Post by Zoot Horn » Mon Sep 05, 2011 10:10 am

I think the office is just below Cabin 1
Top
User avatar
engtaz
"TAZ"
Posts: 5421
Joined: Sat Jun 30, 2007 1:43 pm
Location: Tampa, FL

Re: Shipping to Carverfest, what is the address?

Post by engtaz » Mon Sep 05, 2011 10:17 am

That means your the Postman. LOLOLOL :lol: :lol: :lol: :lol: :lol:
engtaz


Carver M4.0T in front channels to Caver AL VI's in SACD & 2 Channel setup
C 16, PT 2400, Slim Device, Carver TX-8, 490T and Rega TT w Grado Gold cart in the 2 channel setup
Bogen SRB20 is computer amp
Carver PM-350 donated for youth church use
Top
Post Reply

Return to “CARVERFEST 2011”