I thought I answered this already, I can help
but in the mean time, for the guys who have never soldered, get some wire, strip the ends, tin these and reattach them to each other.
also twist the ends together and solder this.
if you have any junk electronics, cut out some of the resistors and caps, solder the ends together.
radio shack sells project boards you can also get a big bag of resistors for about 12$, then go to town. see what solder looks like when it gets hot and starts to flow,
something else, to remember solderer will flow to the heat, if you have ever seen copper water pipe done up, you get the joint hot, but then when its starting to melt, you move the heat to the bottom of the joint, it pulls/wicks the solder right into and all around the joint.
#1 BLACK BEAUTY's made by the man, the myth, the legend Bob Carver
CARVER: TFM-75, TFM-45(3), SD/A-490T
SUNFIRE: Tube pre
WTL Amadeus GTA+DV DRT XV-1t
2 sets of ALS'3, set of SILVERS, set of PLATS
AUDIOCONTROL: phase coupled activator
KENWOOD: BASIC M2a (2)
“Youth ages, immaturity is outgrown, ignorance can be educated, and drunkenness sobered, but stupid lasts forever.”
The only thing I'll feel......will be the RECOIL
Necronomicon Ex-Mortis....... Klaatu Barada Nikkto
"We should seek the greatest value of our action"