Wed Jul 27, 2011 7:27 pm
Re: CARVER LED SIGN
So James...are you gonna sell the signs or what??? Kool blue is nice but a Clemson ORANGE would be nice too!!!!
In reality, it only matters what it sounds like to YOU!!!
It is currently Wed May 22, 2013 11:28 am
CARVER LED SIGN
44 posts
• Page 2 of 3 • 1, 2, 3
(pair of) SILVER-7 TUBE AMPs
Posts: 5215
Joined: Sun Nov 30, 2008 3:10 pm
Location: Upstate South Carolina
Wed Jul 27, 2011 8:19 pm
Re: CARVER LED SIGN
kingman wrote:So James...are you gonna sell the signs or what??? Kool blue is nice but a Clemson ORANGE would be nice too!!!!
Or buckeye scarlet (red)
Carverfest 2010 quote...I can't explain it right now, I'm drunk...
GO BUCKEYES
GO BUCKEYES
(pair of) SILVER-7 TUBE AMPs
Posts: 7295
Joined: Wed Jun 06, 2007 9:29 pm
Location: The west's most mid-western town, Scottsdale, Arizona
Wed Jul 27, 2011 8:26 pm
Re: CARVER LED SIGN
Go Blue!
Now, can we get a Sunfire one in Maize?
Now, can we get a Sunfire one in Maize?
It should sound like it isn't there!
There is a difference between hearing and listening...
Making life enjoyable through expensive electronics.
_________________
Carver: C-4000 & C-1 preamps, PSC-60 preamp/tuner, TX-11a tuner, M-400 (2), C-500, M-500, M-500t, M-500t Mk.II, A-500x, AL-III loudspeakers (2 pr.)
Sunfire:Theater Grand III processor, Ultimate Receiver, Cinema Grand Signature 400 ~ seven, True Subwoofer Mk. II, D-10 Subwoofer
There is a difference between hearing and listening...
Making life enjoyable through expensive electronics.
_________________
Carver: C-4000 & C-1 preamps, PSC-60 preamp/tuner, TX-11a tuner, M-400 (2), C-500, M-500, M-500t, M-500t Mk.II, A-500x, AL-III loudspeakers (2 pr.)
Sunfire:Theater Grand III processor, Ultimate Receiver, Cinema Grand Signature 400 ~ seven, True Subwoofer Mk. II, D-10 Subwoofer
Wed Jul 27, 2011 9:05 pm
Re: CARVER LED SIGN
BillD wrote:Go Blue!
Now, can we get a Sunfire one in Maize?
Sunfire
BillD, You will be forever with us! RIP until we meet again on the other side...
Wed Jul 27, 2011 9:42 pm
Re: CARVER LED SIGN
Yeah, I have the Sunfire logo too.. Not a big deal to make either.
Was thinking about putting them on eBay. But I need to buy some parts 1st.
The one I made has cold cathode bulbs in it, cause I had some laying around.
The eBay version will be all LED's. Cheaper and more reliable. They should light up just the same.
But I need to order them, and some 200ma transformers.
Should have everything before Carverfest.
Was thinking about putting them on eBay. But I need to buy some parts 1st.
The one I made has cold cathode bulbs in it, cause I had some laying around.
The eBay version will be all LED's. Cheaper and more reliable. They should light up just the same.
But I need to order them, and some 200ma transformers.
Should have everything before Carverfest.
Whatever you do in life will be insignificant, but it's very important that you do it 'cause nobody else will
~You think Einstein walked around thinkin' everyone was a bunch of dumb shits?~
ＳＨＵＴ ＵＰ ＡＮＤ ＥＮＪＯＹ ＴＨＥ ＭＵＳＩＣ！
╭∩╮（︶︿︶）╭∩╮
~You think Einstein walked around thinkin' everyone was a bunch of dumb shits?~
ＳＨＵＴ ＵＰ ＡＮＤ ＥＮＪＯＹ ＴＨＥ ＭＵＳＩＣ！
╭∩╮（︶︿︶）╭∩╮
Tue Sep 27, 2011 9:29 pm
Re: CARVER LED SIGN
Toy Maker wrote:Yeah, I have the Sunfire logo too.. Not a big deal to make either.
Was thinking about putting them on eBay. But I need to buy some parts 1st.
The one I made has cold cathode bulbs in it, cause I had some laying around.
The eBay version will be all LED's. Cheaper and more reliable. They should light up just the same.
But I need to order them, and some 200ma transformers.
Should have everything before Carverfest.
James,
Are these still in the works?
To argue with a person who has renounced the use of reason is like administering medicine to the dead.
— Thomas Paine
"Try not to become a man of success, but rather a man of value" Albert Einstein
"Politicians are the only people in the world who create problems and then campaign against them". Charlie Reese
"The problems we face today exist because the people who work for a living are outnumbered by those who vote for a living." Brad Shurett
RIP Bill D.
— Thomas Paine
"Try not to become a man of success, but rather a man of value" Albert Einstein
"Politicians are the only people in the world who create problems and then campaign against them". Charlie Reese
"The problems we face today exist because the people who work for a living are outnumbered by those who vote for a living." Brad Shurett
RIP Bill D.
Tue Sep 27, 2011 9:41 pm
Re: CARVER LED SIGN
Sorry, the sign wasn't lit for CF.... Handy-Boy hooked the wires up AssBackWards and blew the transformer....
I never thought to bring an extra... It's not like I don't have about 100 of them laying around here](./images/smilies/eusa_wall.gif "Brick wall")
I never thought to bring an extra... It's not like I don't have about 100 of them laying around here
Whatever you do in life will be insignificant, but it's very important that you do it 'cause nobody else will
~You think Einstein walked around thinkin' everyone was a bunch of dumb shits?~
ＳＨＵＴ ＵＰ ＡＮＤ ＥＮＪＯＹ ＴＨＥ ＭＵＳＩＣ！
╭∩╮（︶︿︶）╭∩╮
~You think Einstein walked around thinkin' everyone was a bunch of dumb shits?~
ＳＨＵＴ ＵＰ ＡＮＤ ＥＮＪＯＹ ＴＨＥ ＭＵＳＩＣ！
╭∩╮（︶︿︶）╭∩╮
Tue Sep 27, 2011 11:22 pm
Re: CARVER LED SIGN
BillD wrote:Go Blue!
Now, can we get a Sunfire one in Maize?
You meant Michigan right ?
Wed Sep 28, 2011 2:18 pm
Re: CARVER LED SIGN
I'll take a Sunfire one when you get the kinks ironed out. Are they battery powered? That would be easier than 110 volt.
Payment will immediately follow delivery~
Payment will immediately follow delivery~
TNRabbit
From FrankieD's lips to your ears: Sunfire: a quiet box of endless power.
Sunfire TG-IV/400~7 Amp
Carver SD/A-360 CDP
Benchmark DAC-1
Sony SACD/DVD-A
Active bi-amp: Ashly XR-1001 & 2 Rane PEQ-15s
Main: HotRodded AL-IIIs
Sub: Klipsch RT-12d
Center: Sunfire CRS-3c
Surround: Sunfire CRS-3 (x 2)
RIP WIlliam B. Dibble, 1948-2012. I'll miss you my friend.
From FrankieD's lips to your ears: Sunfire: a quiet box of endless power.
Sunfire TG-IV/400~7 Amp
Carver SD/A-360 CDP
Benchmark DAC-1
Sony SACD/DVD-A
Active bi-amp: Ashly XR-1001 & 2 Rane PEQ-15s
Main: HotRodded AL-IIIs
Sub: Klipsch RT-12d
Center: Sunfire CRS-3c
Surround: Sunfire CRS-3 (x 2)
OconeeOrange wrote:"Gary likes to play it 'loud' as do I. His system begs you turn it up until you die"
RIP WIlliam B. Dibble, 1948-2012. I'll miss you my friend.
Wed Sep 28, 2011 2:53 pm
Re: CARVER LED SIGN
No, no batteries. It would be nice, but the cold cathodes draw too much power to go with batteries.
LEDs would be nice though
LEDs would be nice though
Whatever you do in life will be insignificant, but it's very important that you do it 'cause nobody else will
~You think Einstein walked around thinkin' everyone was a bunch of dumb shits?~
ＳＨＵＴ ＵＰ ＡＮＤ ＥＮＪＯＹ ＴＨＥ ＭＵＳＩＣ！
╭∩╮（︶︿︶）╭∩╮
~You think Einstein walked around thinkin' everyone was a bunch of dumb shits?~
ＳＨＵＴ ＵＰ ＡＮＤ ＥＮＪＯＹ ＴＨＥ ＭＵＳＩＣ！
╭∩╮（︶︿︶）╭∩╮
Wed Sep 28, 2011 3:19 pm
Re: CARVER LED SIGN
So are you going to make them? What do you think the price will be? If you make them, I will buy one.
Some cool Carver stuff!
Wed Sep 28, 2011 4:02 pm
Re: CARVER LED SIGN
thuffman03 wrote:So are you going to make them? What do you think the price will be? If you make them, I will buy one.
I'll take a Carver sign also
Wed Sep 28, 2011 4:51 pm
Re: CARVER LED SIGN
I don't know. Depends on the power supplies.
LEDs would be best, they don't require an 2nd transformer like the cold cathodes to.
Cold cathodes are basically very tiny neon strips. Same kind of bulb in a scanner.
CRAZY BRIGHT, but they need a 2nd transformer to step the 12v up to like 50kv or something stupid like that.
And that 2nd transformer is bigger, and hard to hide.
LEDs would only require 1 single 12v wall wart.
If I get the LEDs and transformers, I'd guess each sign would run $30 or so.
Start posting "pre-order wants" to get me motivated enough to do it.
It's just like everything else... Sounds good, looks good, I just never do it.
LEDs would be best, they don't require an 2nd transformer like the cold cathodes to.
Cold cathodes are basically very tiny neon strips. Same kind of bulb in a scanner.
CRAZY BRIGHT, but they need a 2nd transformer to step the 12v up to like 50kv or something stupid like that.
And that 2nd transformer is bigger, and hard to hide.
LEDs would only require 1 single 12v wall wart.
If I get the LEDs and transformers, I'd guess each sign would run $30 or so.
Start posting "pre-order wants" to get me motivated enough to do it.
It's just like everything else... Sounds good, looks good, I just never do it.
Whatever you do in life will be insignificant, but it's very important that you do it 'cause nobody else will
~You think Einstein walked around thinkin' everyone was a bunch of dumb shits?~
ＳＨＵＴ ＵＰ ＡＮＤ ＥＮＪＯＹ ＴＨＥ ＭＵＳＩＣ！
╭∩╮（︶︿︶）╭∩╮
~You think Einstein walked around thinkin' everyone was a bunch of dumb shits?~
ＳＨＵＴ ＵＰ ＡＮＤ ＥＮＪＯＹ ＴＨＥ ＭＵＳＩＣ！
╭∩╮（︶︿︶）╭∩╮
TFM-45
Posts: 535
Joined: Sat May 15, 2010 12:53 am
Location: wisconsin,home of the green bay packers!!
Wed Sep 28, 2011 4:51 pm
Re: CARVER LED SIGN
I'll take a Carver sign also 
tfm25 Rollandized tfm42 ct-17 sda390t jolida jd 100A & 2 pairs of jbl L96 jbl 4401 & carverfest vacuum tube amp & Dared SL-2000A tube preamp
Wed Sep 28, 2011 6:52 pm
Re: CARVER LED SIGN
1 of each for me!
To argue with a person who has renounced the use of reason is like administering medicine to the dead.
— Thomas Paine
"Try not to become a man of success, but rather a man of value" Albert Einstein
"Politicians are the only people in the world who create problems and then campaign against them". Charlie Reese
"The problems we face today exist because the people who work for a living are outnumbered by those who vote for a living." Brad Shurett
RIP Bill D.
— Thomas Paine
"Try not to become a man of success, but rather a man of value" Albert Einstein
"Politicians are the only people in the world who create problems and then campaign against them". Charlie Reese
"The problems we face today exist because the people who work for a living are outnumbered by those who vote for a living." Brad Shurett
RIP Bill D.
44 posts
• Page 2 of 3 • 1, 2, 3
Return to CARVERaudio.com Products
Who is online
Users browsing this forum: No registered users and 0 guests