Carver Speaker Discussions and Questions
- Site Admin
- Posts: 614
- Joined: Sun Apr 13, 2008 5:41 pm
- Location: Fort Myers FL
sam046 wrote:I have two AL-III ribbons that need repair. I have called the number for James Sauter who is recommended on the Carver Site to no avail. I have repeatedly called and even sent a message, but no response. Does anyone have any updated info on where to get these repaired? I would even buy new ones if I could find them. Thanks in advance!
I am sitting here next to James, all of his information is still the same. I will tell him to stop ignoring his phone, he has been doing that allot lately....
My system (sitting in the garage):
Carver Pro PT-1800
RCA-Headphone jack for iPod & iPhone
- R.I.P. Friend
- Posts: 13360
- Joined: Sun Jan 14, 2007 11:53 am
- Location: TN Native Languishing in VA
Not to make excuses but I know they're covered up with making the new ALS speakers. I called and talked to james' son, Alex, just now. He said he would let James know.
EDIT: He beat me to it.....
From FrankieD's lips to your ears: Sunfire - a quiet box of endless power.
Sunfire TG-IV/400~7 Amp
Carver SD/A-360 CDP
Active bi-amp: Ashly XR-1001 & 2 Rane PEQ-15s
Main: HotRodded AL-IIIs
Sub: Klipsch RT-12d
Center: Sunfire CRS-3c
Surround: Sunfire CRS-3 (x 2)
RIP WIlliam B. Dibble, 1948-2012. I'll miss you my friend.
OconeeOrange wrote:"Gary likes to play it 'loud' as do I. His system begs you turn it up until you die"
- Posts: 27
- Joined: Mon Mar 19, 2012 4:30 pm
I was able to put back on the magnets in place and I am working on to rebuilt my 30 inch carver .
I have 5 .
2 60 inches and
3 with 30 inch .
Only one working .
I got the materials from ebay Mylar 6 micron the aluminum from Cosco food stand .
However, I have the hard time to glue the aluminum to the mylar and I have too many connection . It doesn't look to smooth.
I also use the material from Mycrolite ( use in airplane model). It is very messy because of the glue .
any help would be appreciated.
- (pair of) SILVER-7t's
- Posts: 2157
- Joined: Mon Jan 25, 2010 2:32 am
- Location: Woodinville Wa
Amazing Line Source
2 SVS PB16 SUBS
#1 BLACK BEAUTY's made by the man, the myth, the legend Bob Carver
CARVER: TFM-75, TFM-45(3), SD/A-490T
SUNFIRE: Tube pre
WTL Amadeus GTA+DV DRT XV-1t
2 sets of ALS'3, set of SILVERS, set of PLATS
AUDIOCONTROL: phase coupled activator
KENWOOD: BASIC M2a (2)
“Youth ages, immaturity is outgrown, ignorance can be educated, and drunkenness sobered, but stupid lasts forever.”
The only thing I'll feel......will be the RECOIL
Necronomicon Ex-Mortis....... Klaatu Barada Nikkto
"We should seek the greatest value of our action"
- SILVER-7 TUBE AMP
- Posts: 2652
- Joined: Sat Jun 06, 2009 10:56 pm
- Location: manning, sc
hello ribbonspeaker, welcome aboard. good luck for sure as the mylar replacement for the panels. i just had a 30" done by alex and james this past week. what james uses is manufactured and sold in a large quantity that is in the thousands when the sauters order a new batch. you have taken on a real undertaking i am sure to get it done in a small quantity. please keep us informed on how it comes out.
now on the other guy, if yours are the ribbons that were repaired while i was visiting, i think they are being sent out in the next day or so if they didn't go out today. they truely do remanufacture them as i am a first hand witness. good luck all.
CarverFest: I just go for the arts and crafts