TG3 displays mem test

Anyone have this problem.

When plugged in the front panel says "mem test"

I think she might be toast! Can't do anything, no sound no nothing.

Send it to me, I'll give it a good home!

Have you tried to reset it? It tells how in the manual.

IF that doesn't fix it, try re-seating the ribbon cable inside the unit. Those seem to cause problems with the Sunfire units.

viewtopic.php?f=16&t=10992&p=104880&hilit=tgr3+reset#p104880

Page 54 in the owner's manual tells you how to do a factory reset:

http://www.sunfire.com/manuals/Theater% ... 20RevC.pdf

Thanks rabbit, I will give the ribbon a try. As for the reset, tried that to no avail.

no go on the ribbon

We were all wondering what kind of issues would arise from the Chinese-made Sunfire equipment they are now producing....

I'm assuming this is a Theater Grand Processor III or TGP-III right, nor the "made in china" TGR-3? Based on your signature of course.

AH...I misread. Thought that was the TGR3 receiver.

The reset doesn't work.......time for a trip to Rita. That's about all you can do at this point. At least give her a call & see if she has any suggestions you can try before sending it off.

Thanks guy's, by the way I talked to Rolland at hi tech and he thinks the processor might be toast if I can't reset it some how. Kind of like a jump start or something.

Will try Rita for the last ditch effort.

Anybody need parts?

Don't part it out just yet, Bill @ Rita's can fix this. If you don't want to spend the cash, I'll buy it from you, let me know, thanks.