New power cables for the TFM-75??
New power cables for the TFM-75??
I have lived with the lamp chord power cables on the 75 because there is no way I would cut on this chassis. But after being prodded by snoop to do something about these cables I took the lid off and think it might could be done with no modifications to the original sheet metal. Here is a couple pics.
TFM-75 serial #0001
PT-2400 serial #0001
Baby Black Magic serial #0001
Baby Black Magic serial #0002
Cherry/260wpc Mono Blocks
Lightstar Reference
Sunfire Series II 625x2
Carver 490t
OPPO-103
Lucas Labs CF-14
Sunfire Tube pre
DENON DP-62L TT
DUAL CS 5000 TT
DQ-20's
Tesla CF-15 speakers
Douglas Cables
OK ERIC, LET GO OF THE MOUSE AND BACK AWAY FROM YOUR PC WITH YOUR HANDS IN THE AIR. NOW SLOWLY LAY FACE DOWN ON THE FLOOR!!!! - Snoop65
PT-2400 serial #0001
Baby Black Magic serial #0001
Baby Black Magic serial #0002
Cherry/260wpc Mono Blocks
Lightstar Reference
Sunfire Series II 625x2
Carver 490t
OPPO-103
Lucas Labs CF-14
Sunfire Tube pre
DENON DP-62L TT
DUAL CS 5000 TT
DQ-20's
Tesla CF-15 speakers
Douglas Cables
OK ERIC, LET GO OF THE MOUSE AND BACK AWAY FROM YOUR PC WITH YOUR HANDS IN THE AIR. NOW SLOWLY LAY FACE DOWN ON THE FLOOR!!!! - Snoop65
Re: New power cables for the TFM-75??
whats your plan?
the 2400 has removable cords
the 2400 has removable cords
Mbskeam
SILVER 7's
Amazing Line Source
2 SVS PB16 SUBS
#1 BLACK BEAUTY's made by the man, the myth, the legend Bob Carver
CARVER: TFM-75, TFM-45(3), SD/A-490T
SUNFIRE: Tube pre
WTL Amadeus GTA+DV DRT XV-1t
2 sets of ALS'3, set of SILVERS, set of PLATS
AUDIOCONTROL: phase coupled activator
KENWOOD: BASIC M2a (2)
“Youth ages, immaturity is outgrown, ignorance can be educated, and drunkenness sobered, but stupid lasts forever.”
― Aristophanes
The only thing I'll feel......will be the RECOIL
Necronomicon Ex-Mortis....... Klaatu Barada Nikkto
"We should seek the greatest value of our action"
SILVER 7's
Amazing Line Source
2 SVS PB16 SUBS
#1 BLACK BEAUTY's made by the man, the myth, the legend Bob Carver
CARVER: TFM-75, TFM-45(3), SD/A-490T
SUNFIRE: Tube pre
WTL Amadeus GTA+DV DRT XV-1t
2 sets of ALS'3, set of SILVERS, set of PLATS
AUDIOCONTROL: phase coupled activator
KENWOOD: BASIC M2a (2)
“Youth ages, immaturity is outgrown, ignorance can be educated, and drunkenness sobered, but stupid lasts forever.”
― Aristophanes
The only thing I'll feel......will be the RECOIL
Necronomicon Ex-Mortis....... Klaatu Barada Nikkto
"We should seek the greatest value of our action"
- Snoop65
- SILVER-7 TUBE AMP
- Posts: 2691
- Joined: Mon Jun 28, 2010 9:04 pm
- Location: A galaxy far far away
Re: New power cables for the TFM-75??
Yes what do you have planned? It looks really tight in that amp. I would consider contacting Roland or Rita's to do the mod for you if possible.
CARVER LIGHTSTAR REFERENCE+SUNFIRE CLASSIC TUBE PREAMPLIFIER+JBL XPL200+MUSIC HALL MMF-9.1+GRADO REFERENCE MASTER 1+Cayin CDT-17a =WOW!!!!!!
Re: New power cables for the TFM-75??
Your pictures are useless. What's the ass end look like where the cord comes in? That will determine whether you can add an IEC.
If you've got the room, cutting the chassis is the last thing you should concern yourself with.
I recommend Furutech IEC's.
If you've got the room, cutting the chassis is the last thing you should concern yourself with.
I recommend Furutech IEC's.
Political Correctness...defined
A doctrine fostered by a delusional, illogical minority and rabidly promoted by an unscrupulous mainstream media, which holds forth the proposition that it is entirely possible to pick up a turd by the clean end.
In a recent press conference, President Obama remarked, "If I had a city, it would look just like Detroit."
A doctrine fostered by a delusional, illogical minority and rabidly promoted by an unscrupulous mainstream media, which holds forth the proposition that it is entirely possible to pick up a turd by the clean end.
In a recent press conference, President Obama remarked, "If I had a city, it would look just like Detroit."
Re: New power cables for the TFM-75??
Its VERY tight in there.
Last edited by MRHP on Mon Aug 06, 2012 8:29 am, edited 1 time in total.
TFM-75 serial #0001
PT-2400 serial #0001
Baby Black Magic serial #0001
Baby Black Magic serial #0002
Cherry/260wpc Mono Blocks
Lightstar Reference
Sunfire Series II 625x2
Carver 490t
OPPO-103
Lucas Labs CF-14
Sunfire Tube pre
DENON DP-62L TT
DUAL CS 5000 TT
DQ-20's
Tesla CF-15 speakers
Douglas Cables
OK ERIC, LET GO OF THE MOUSE AND BACK AWAY FROM YOUR PC WITH YOUR HANDS IN THE AIR. NOW SLOWLY LAY FACE DOWN ON THE FLOOR!!!! - Snoop65
PT-2400 serial #0001
Baby Black Magic serial #0001
Baby Black Magic serial #0002
Cherry/260wpc Mono Blocks
Lightstar Reference
Sunfire Series II 625x2
Carver 490t
OPPO-103
Lucas Labs CF-14
Sunfire Tube pre
DENON DP-62L TT
DUAL CS 5000 TT
DQ-20's
Tesla CF-15 speakers
Douglas Cables
OK ERIC, LET GO OF THE MOUSE AND BACK AWAY FROM YOUR PC WITH YOUR HANDS IN THE AIR. NOW SLOWLY LAY FACE DOWN ON THE FLOOR!!!! - Snoop65
- Snoop65
- SILVER-7 TUBE AMP
- Posts: 2691
- Joined: Mon Jun 28, 2010 9:04 pm
- Location: A galaxy far far away
Re: New power cables for the TFM-75??
Can you say shoehorn? You don't have enough room for dust. I would let a professional do this one. I'm not that adventurous.
CARVER LIGHTSTAR REFERENCE+SUNFIRE CLASSIC TUBE PREAMPLIFIER+JBL XPL200+MUSIC HALL MMF-9.1+GRADO REFERENCE MASTER 1+Cayin CDT-17a =WOW!!!!!!
Re: New power cables for the TFM-75??
I like a good challenge!......bwahaahahahaha
And speaking of challenge Im gonna shot gun this computer if it doesnt start cooperating with me...lol
Im thinking about building a bracket that will bolt to the rack mount and hold the plug ins and running the internal wires out thru the existing holes to the external mounted plug ins. Maybe I can even make it look half decent too. My question is, what kind of wire should be used to run between the new plug ins and electical boards??? It might as well be the good stuff since all I have to do is route it and plug in. Does this make sense, Im not good with tech talk...lol
Here is the back.
And speaking of challenge Im gonna shot gun this computer if it doesnt start cooperating with me...lol
Im thinking about building a bracket that will bolt to the rack mount and hold the plug ins and running the internal wires out thru the existing holes to the external mounted plug ins. Maybe I can even make it look half decent too. My question is, what kind of wire should be used to run between the new plug ins and electical boards??? It might as well be the good stuff since all I have to do is route it and plug in. Does this make sense, Im not good with tech talk...lol
Here is the back.
TFM-75 serial #0001
PT-2400 serial #0001
Baby Black Magic serial #0001
Baby Black Magic serial #0002
Cherry/260wpc Mono Blocks
Lightstar Reference
Sunfire Series II 625x2
Carver 490t
OPPO-103
Lucas Labs CF-14
Sunfire Tube pre
DENON DP-62L TT
DUAL CS 5000 TT
DQ-20's
Tesla CF-15 speakers
Douglas Cables
OK ERIC, LET GO OF THE MOUSE AND BACK AWAY FROM YOUR PC WITH YOUR HANDS IN THE AIR. NOW SLOWLY LAY FACE DOWN ON THE FLOOR!!!! - Snoop65
PT-2400 serial #0001
Baby Black Magic serial #0001
Baby Black Magic serial #0002
Cherry/260wpc Mono Blocks
Lightstar Reference
Sunfire Series II 625x2
Carver 490t
OPPO-103
Lucas Labs CF-14
Sunfire Tube pre
DENON DP-62L TT
DUAL CS 5000 TT
DQ-20's
Tesla CF-15 speakers
Douglas Cables
OK ERIC, LET GO OF THE MOUSE AND BACK AWAY FROM YOUR PC WITH YOUR HANDS IN THE AIR. NOW SLOWLY LAY FACE DOWN ON THE FLOOR!!!! - Snoop65
Re: New power cables for the TFM-75??
I think if I owned TFM-75 serial number #0001, I'd leave it alone. Let it stay original.
Buy another TFM-75 if you want to modify.
Buy another TFM-75 if you want to modify.
My office (and only) system:
Sunfire Ultimate Receiver (thanks jjptkd!)
Sunfire Theater Grand Processor (with original remote!)
Carver TD-1770
Klipsch Chorus II's
Sony CA70ES 5-disc changer
Sony SACD 5-disc changer
Sunfire Ultimate Receiver (thanks jjptkd!)
Sunfire Theater Grand Processor (with original remote!)
Carver TD-1770
Klipsch Chorus II's
Sony CA70ES 5-disc changer
Sony SACD 5-disc changer
Re: New power cables for the TFM-75??
Trust Bob !
If the existing power cords weren't good enough Bob wouldn't have used them.
If the existing power cords weren't good enough Bob wouldn't have used them.
Re: New power cables for the TFM-75??
"I think if I owned TFM-75 serial number #0001, I'd leave it alone. Let it stay original."
2x ^^^
Almost a crime... If I could not 100% undo the change, I'd not do it. Or have it professionally done at the least.
2x ^^^
Almost a crime... If I could not 100% undo the change, I'd not do it. Or have it professionally done at the least.
FR: 400 disk changer with PS Audio Digital Link III DAC; Technics SL-1100A TT. QED Quenx1 IC's from DAC & TT to Adcom GTP-602 preamp/Tuner. AudioQuest King Cobra IC's from preamp to M1.0t mk-II opt2. QED Silver Spirals 4M wires to EPI 1000’s.
LR: AudioEngine wireless link from family room preamp to Barcus-Berry 2002R Sonic Maximizer to GlowPower Zyxt IC's to Sunfire 300x2 to Nordost 6M bi-source wires to AOS 28" MDF spherical speakers using six 6.5" woofers and eight 1" dome tweeters symm. arranged around the surface.
SS system: CX-995V DVD to AV-634x 3-4 channel amp (center/rears) & M1.0t mk-II opt2(fronts).
Garage: 300 disk changer to Entech 202.5 DAC to MXR150 Receiver (pre) to TFM-42 to EPI 400 speakers.
LR: AudioEngine wireless link from family room preamp to Barcus-Berry 2002R Sonic Maximizer to GlowPower Zyxt IC's to Sunfire 300x2 to Nordost 6M bi-source wires to AOS 28" MDF spherical speakers using six 6.5" woofers and eight 1" dome tweeters symm. arranged around the surface.
SS system: CX-995V DVD to AV-634x 3-4 channel amp (center/rears) & M1.0t mk-II opt2(fronts).
Garage: 300 disk changer to Entech 202.5 DAC to MXR150 Receiver (pre) to TFM-42 to EPI 400 speakers.
- kingman
- (pair of) SILVER-7 TUBE AMPs
- Posts: 6359
- Joined: Sun Nov 30, 2008 2:10 pm
- Location: Upstate South Carolina
Re: New power cables for the TFM-75??
Don't Do It!!!!!!!! ](./images/smilies/eusa_wall.gif)
](./images/smilies/eusa_wall.gif)
In reality, it only matters what it sounds like to YOU!!!
- Snoop65
- SILVER-7 TUBE AMP
- Posts: 2691
- Joined: Mon Jun 28, 2010 9:04 pm
- Location: A galaxy far far away
Re: New power cables for the TFM-75??
I have to agree on this one. I don't think you want to mod #001.
CARVER LIGHTSTAR REFERENCE+SUNFIRE CLASSIC TUBE PREAMPLIFIER+JBL XPL200+MUSIC HALL MMF-9.1+GRADO REFERENCE MASTER 1+Cayin CDT-17a =WOW!!!!!!
Re: New power cables for the TFM-75??
Has any of you well-connected gents ever asked Mr. Carver his opinion on upgrading power cords?
Re: New power cables for the TFM-75??
Yes, I believe "they" have. If memory serves, I believe the consenus is that the Bobfather is not a big believer in "magic wire properties". But what does he know?
But just like RadioEng knows more about digital sampling theory than those that actually build DA/AD converters, there are those here who think they know more about amps and PC's than Bob does. They believe their "ears" and refuse to consider all of the evidence re phyco-accoustical effects, etc., etc. Whatever; who cares? To each his own...but I tend to go with the true experts in these fields and not "$800 PC salesman"...nor "radio techs".


FR: 400 disk changer with PS Audio Digital Link III DAC; Technics SL-1100A TT. QED Quenx1 IC's from DAC & TT to Adcom GTP-602 preamp/Tuner. AudioQuest King Cobra IC's from preamp to M1.0t mk-II opt2. QED Silver Spirals 4M wires to EPI 1000’s.
LR: AudioEngine wireless link from family room preamp to Barcus-Berry 2002R Sonic Maximizer to GlowPower Zyxt IC's to Sunfire 300x2 to Nordost 6M bi-source wires to AOS 28" MDF spherical speakers using six 6.5" woofers and eight 1" dome tweeters symm. arranged around the surface.
SS system: CX-995V DVD to AV-634x 3-4 channel amp (center/rears) & M1.0t mk-II opt2(fronts).
Garage: 300 disk changer to Entech 202.5 DAC to MXR150 Receiver (pre) to TFM-42 to EPI 400 speakers.
LR: AudioEngine wireless link from family room preamp to Barcus-Berry 2002R Sonic Maximizer to GlowPower Zyxt IC's to Sunfire 300x2 to Nordost 6M bi-source wires to AOS 28" MDF spherical speakers using six 6.5" woofers and eight 1" dome tweeters symm. arranged around the surface.
SS system: CX-995V DVD to AV-634x 3-4 channel amp (center/rears) & M1.0t mk-II opt2(fronts).
Garage: 300 disk changer to Entech 202.5 DAC to MXR150 Receiver (pre) to TFM-42 to EPI 400 speakers.
Re: New power cables for the TFM-75??
If ya want to modify tfm75 ser #1. I will send you mine, and you send me yours..... 

Mbskeam
SILVER 7's
Amazing Line Source
2 SVS PB16 SUBS
#1 BLACK BEAUTY's made by the man, the myth, the legend Bob Carver
CARVER: TFM-75, TFM-45(3), SD/A-490T
SUNFIRE: Tube pre
WTL Amadeus GTA+DV DRT XV-1t
2 sets of ALS'3, set of SILVERS, set of PLATS
AUDIOCONTROL: phase coupled activator
KENWOOD: BASIC M2a (2)
“Youth ages, immaturity is outgrown, ignorance can be educated, and drunkenness sobered, but stupid lasts forever.”
― Aristophanes
The only thing I'll feel......will be the RECOIL
Necronomicon Ex-Mortis....... Klaatu Barada Nikkto
"We should seek the greatest value of our action"
SILVER 7's
Amazing Line Source
2 SVS PB16 SUBS
#1 BLACK BEAUTY's made by the man, the myth, the legend Bob Carver
CARVER: TFM-75, TFM-45(3), SD/A-490T
SUNFIRE: Tube pre
WTL Amadeus GTA+DV DRT XV-1t
2 sets of ALS'3, set of SILVERS, set of PLATS
AUDIOCONTROL: phase coupled activator
KENWOOD: BASIC M2a (2)
“Youth ages, immaturity is outgrown, ignorance can be educated, and drunkenness sobered, but stupid lasts forever.”
― Aristophanes
The only thing I'll feel......will be the RECOIL
Necronomicon Ex-Mortis....... Klaatu Barada Nikkto
"We should seek the greatest value of our action"