So long story short... we bought a house here in Brownsburg so I've been busy as hell moving in and getting setup. So I thought I would update this thread with my "new" office setup.
I have all the power cables running through the cable management in the rack and nothing but the signal cables are outside. The IC's are routed as best they can be given the situation.
EVERYTHING in the office is connected to the APC unit and I still have room for more if I wanted. That was the last piece of gear I was looking for. I picked it up for 80 bucks locally earlier this week and couldn't be happier.
The amp's location must be up that high as it will only fit there due to its depth and the depth needed for Dougs cables pigtails. I actually kinda like it that high up. Lets me isolate it from any other signal cables easier.
I will try to get some better pictures tomorrow, but its late and both my wife and daughter are asleep and keeping the lights on to take pics would wake them up.
Also note that I ended up placing the TT on the lower shelf. Not sure if it will stay there as I would like to mount it above the computer on a custom bracket possibly.
I do have plans for sound panels, but for now this will be fine once I get cables long enough to run on the floor.
**Please Note** I plan to do better with the speaker cables but currently they are not long enough to reach my left speaker without running it like I did. I also plan to space them out wider as I have the room and toe them in slightly as well as add back the spikes I took off as I didnt want to spike them till I had a better idea where they were going.
Digital Source: Computer via Black Cat Veloce Coaxial cable to Cambridge Audio DacMagic w/ Pangea Powersupply
Analog Source: Project Debut III
Pre Amp: Sunfire TGP-II
Power Amp: Parasound HCA-750ii
Speakers: Polk RTA 11TL
Speaker Cables: Douglass Connection 9 gauge demo set
Interconnects: Douglass Connection demo's
Power Conditioning: APC H15