FAQ  •  Register   •  Gallery •  Login

It is currently Fri Mar 24, 2017 11:04 pm

Ground Loop




Posts: 1076

Joined: Thu Aug 17, 2006 10:40 am

Location: North Carolina

Post Sun Dec 21, 2008 12:33 pm

Re: Ground Loop

I have also seen thorny hum problems solved this way:

Pull the power meter off. Inside, the neutral I am told, should run straight through to the panel. It should be in one peice, not clamped together. I have personally witnessed the corrosion that builds up under the clamp, but when cleaned to a shine and clamped again the hum went away.

I have also seen corroded connections at the weatherhead cause hum problems. Especially in older homes with aerial power, these connections were simply taped and after years in the elements the corrosion built up. Your local power company should be responsible for everything up to and including the meter, so have them check these points if it comes to that.


User avatar


Posts: 2763

Joined: Fri Mar 09, 2007 1:00 am

Location: Bucyrus, Ohio

Post Thu Dec 25, 2008 8:59 pm

Re: Ground Loop

weitrhino penned....Bob Carver/Tim DeParavicini hand built 180 watt tube monoblocks M500 M500t C-9 AV-634 (2)

I'm SO jealous of those tube amps


Its going to be used equipment when I sell it, so it may as well be used equipment when I buy it.

Return to Carver Research (Lightstar)

Who is online

Users browsing this forum: No registered users and 1 guest

Powered by phpBB © 2011 phpBB Group.