It is currently Wed Oct 22, 2014 8:53 am
Just found us? Entering CarverAudio.com for the first time? Post your introductions here and say hi to all of the other Carver enthusiasts.
My name is James Sauter. I started CarverAudio.com about 6 years ago, and was the original person doing the Carver/Genesis ribbon repars.
After opening http://www.RadicalRouting.com 4 years ago, I sold CarverAudio to my father DaveS. He is currently "The Ribbon Guy"
I have used, and worked on all the different Carver ribbon speakers, and I personaly wanted something new/better. So I designed and built the prototype AL-V's. Our current company has all the equipment needed to build them, so I went ahead and built a set. So far there is only (1) 100% fully finished and working set. I have (2) additional sets at the shop, that are about 75% finished, but have been put aside for now.
These speakers are NOT your typical Carver ribbon speaker. I designed them to my specs... cost was not the issue in building my own speakers, as was the case for Carver in trying to build a production design.
I made a few changes to the ribbon drivers themselves, enableing them to handle the power needed to to withstand "the 1.21 Gig-a-watts of electricty" needed to get these puppies to scream hehehe
But really... I changed the membrane to handle allot more power, and give a much higher volume level. In doing so... It also made the driver less effieient... but with a Carver ribbon, that's nothing new anyway. The ribbons are now 2-Ohms each, and can handle approx, 300-400 watts RMS each. The sub is a 12" Stillwater Kicker (Mo' Betta' Bass) !!! 400 watts ea.
The finish is high end automorive BMW metalic gunmetal gray. with black cloth on the faces. As I said... they wern't designed as a mass production item.
The plan was to work with Bob Carver and take this design to become the the new Carver AL-V's .... But that has been up in the air for 2 over years now. It looks like we'b just be better off selling them direct, without the Carver name on them.
Well, there U have it.... That's how I got them.... I made them
If we were to finish one of the other sets, you'd be looking at about $3500 + shipping.
Here's a crappy pix of my set at home... sorry the pix sucks, my good Digi-cam's at the office right now.
After working my butt off for twenty five years or so and many hobbies later I finally got around to buying a new sound system and so far I am very impressed with the technology available.
About a month ago I asked a sales rep. to show me a powerful stereo that will also handle surround sound. He showed me the Carver C 1000 collecting dust so we began to haggle. I finally purchased the C 1000 receiver and I am very pleased with the sound quality and of course, the power.
I have coupled the receiver to Mirage OM7 speakers and OM2, 3 for center and rear channels with a Mirage 150 watt sub. Fortunately a neighbor owns a stereo shop, lets just say he treats his neighbors "very well".
I am using a Panasonic DVD/CD/MP3 machine for DVD and CD's but will pick up a Sony 300 Disk CD player in a few days. I like the large capacity players big time. When the Sahaydak's stop by this usually involves a marathon Canasta match where Greg and I proceed to kick our wives collective butts all the while sipping expensive whiskey and listening to non-stop blues.
Next on my shopping list is a large screen TV. I mean big, 50" or bigger. I have just started to shop around and I am not sure what to purchase just yet. I hope a deal will be done around Christmas. I am open to suggestions.
I am experiencing some problems with my receiver. Right from the show room floor (not my neighbor's show room!) there was no sound from the right rear speaker and I had a hum on some "power-ups". Any way it was sent out for repair to a shop in the big city. The repair invoice mentioned "re-soldering". Re-soldering of what I will never know but that problem is fixed.
Now I have another problem but I am less than impressed with the authorized repair shop so that is why I have a posting in the "Repairs" forum. I would like to do a bit of research on this new problem before I let the technician tear the receiver from my hands.
2 C-1 preamps (for sale) (1 is older than the other)
DTL-200 CD Player (NEED REPAIR)
2 PM 1.5
2 TFM-45 (NEED REPAIR)
M-400 pushs my 2 JBL loudspeakers
2 PM 1.5 push my 2 18'' fanes
2 TFM-45 used to push my 2 15'' fanes
I have no owners manauls and anyone who know what the specs are
for the PM 1.5 I'd like to know so I don't blow a speaker. Plus Anyone who might want the C-1 preamp it is in very
good shape E-Mail me with Questions at firstname.lastname@example.org
I have a HT rig of sorts in another room, where I use a big honker Onkyo M-5090 power amp to drive the woofers, and a Carver M-500t to drive the mids and tweets in a pair of 1978 vintage AR-9's. I have a Tandberg TCD-310 cassette deck in this rig. Preamp is a sleeper piece, the Apt "Holman" preamp. Holman as in Tomlinson Holman, George Lucas' THX guy. THX is an acronym for Tom Holman's Xperiment.
I've had Carver since the mid-80's. I finally broke down and bought The Amazing's in 1991.
I have a bunch of Carver stuff in storage:
C-11 pre (unused new) SOLD to Eddie on this forum
TL-3330 CD player SOLD to somebody
TX-11a tuna (Now part of my HT rig
M-500t pwr amp (Still in storage as a spare)
TFM-35 pwr amp (unused new) Sold to Eddie on this forum
However i also have a Carver M-200t which i use in a smaller more portable system with a pair of Mission bookshelf speakers. I would like to get a Carver C-1 preamp to match it, i want to hear the sonic holography.
I'm having a littel trouble with my M-200t though, its a little noisy (see my repair section posts) and i think it needs a new transformer, maybe capacitors.
Who is online
Users browsing this forum: No registered users and 3 guests